Quantcast
Jump to content

Recommended Posts

Posted (edited)

hey

thanks for all inputs on my issue

my problem is with my kawaski ranger year i don' know , there is something wrong with it and my best bet is the clutch and the engine shuts down after a couple of minutes when in drive gear , i removed it and here is some picture of it , i think there is something with the springs inside but you guys could please take a look at them , thank you so much

From_Kaftan_s_i_Phone_6.jpg

From_Kaftan_s_i_Phone_4.jpg

From_Kaftan_s_i_Phone_5.jpg

From_Kaftan_s_i_Phone_8.jpg

Edited by hevar
Posted

It is very unfortunate that no one knows what is wrong with my kawasaki

*** update : the other disk which is connected to this one in the picture also broke down

Posted

I am not a mechanic so I am really only throwing ideas out for you. I think if the problem was with the clutch binding it would be easy to spot by the belt slipping. How long does it run before it shuts down? Does it fire right back up after it shuts off or do you have to let it cool down?

Posted
I am not a mechanic so I am really only throwing ideas out for you. I think if the problem was with the clutch binding it would be easy to spot by the belt slipping. How long does it run before it shuts down? Does it fire right back up after it shuts off or do you have to let it cool down?

thanks for the input man ,i found out that its a kawasaki mule 550 2004 , and it is the drive and driven converter that are both broken now , so i don't know , should i be looking for new parts to buy , or is it fixbale , do you know any website that sells mule parts ?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By quadnut20
      Just picked up a 2025 Yamaha Kodiak 700 fixing to do a EPI Clutch mod to it since I dropped bigger tires on it !! Air box , exhaust , and programmer next ! 

    • By digrig
      Hey everyone,
      I’m having an issue with my 2021 Polaris Sportsman 570 – the engine keeps stalling after running for about 10–15 minutes. I’ve checked the air filter, spark plug, and fuel lines, but can’t seem to find the root of the problem. It starts up just fine, but then loses power suddenly.
      Has anyone experienced a similar issue with this model/year? Would appreciate any advice or troubleshooting tips you’ve tried that worked. Thanks in advance for your help!
    • By ButchM
      Hisun 700 EFI. Replaced TMAP sensor had broken off . Fuel pump pressure 41psi. The only way I can keep it running (and runs fine) is to close off fuel return line. 
×
×
  • Create New...