Quantcast
Jump to content

Recommended Posts

Posted

I have a 2000 honda 300ex I just purchased it about a month ago it was toast it had dropped a valve so I rebiult the whole topend it cost alot for just the parts I got it running and ran some heat cycles on it know its running great but got to throw in the but after it gets hot it stops getting fire to the spark plug it will run with no issues for as long as you ride it but when you cut it off and let it set for a few minutes it will spark one time then stop all together after it cools down for a good while it will crank and run again but after I cut it off it wont crank again and I can put a plug on the wire hold it against the block and no fire!!!!:aargh:If anybody knows what it is let me know thanks ??? thanks for welcomin me to quad crazy guys!!!!

Posted
i would guess stator or cdi. if the bike is hot when it wont go, could be the coil too.

the coil will break down when it gets hot ....

thanks for the reply I am going to try and omhn the cdi,stator coil and rectifier with meter and maybe I can find the problem saw that on youtube so Im gonna try it !!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • By Mikey509
      Hey guys i recently got a old recon 250 up and going and the prev owners had the carb screws all messed up. i was wondering if anyone can give me the basic run downs on if i turn both screws all the way "tightened" how many turns out will the quad run okay so i can then dial it in. the prev owner had the screws messed up so bad it woudnt idle. i got it to idle but idles rough. its super lean any guidence is appreciated 
    • By HHurks
      Yesterday I got a UForce 1000 as my first bike and I am wondering if there are any owners that could advise where I can find budget parts and accessories for it.
      I tried looking StarknightMT, but the filtering is a bit unreliable, so direct links or exact names are much appreciated.
      I'm mostly interested in sliders and side cases, but any advices for "must haves" are welcomed.
      Thank you!
    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
×
×
  • Create New...