CDI/Wiring Harness

[ckrumholt]

I got my little boy a 90cc Baja ATV. The end of the wiring harness where the CDI plugs in has been cut off, so i cant put a factory cdi back on it because the pigtail is gone. The guy i bought it from got a aftermarket CDI so it looks like I will have to cut the end of it off and splice then together. I just want to make sure I get them matched up correctly. The color of the wires coming off the bike are...

1 Black White

2 Black Red

3 Black Yellow

4 Green White

5 Green

6 Blue

The colors on the new CDI are.......

1 Black

2 Red

3 Yellow

4 Green

5 Green

6 Blue

Im guessing i can wire them up like i have the numbers listed. just unsure about the greens

[oxidized_black]

found this if any help to you ... blurry, but somewhat legible ...

http://www.highrpmracer.com/chinese-atv-wiring-chinese-parts-wiring-diagram-for-baja-110cc-atvs-p-10431.html

Edited November 22, 2013 by oxidized_black

[ckrumholt]

That's the one I have in the owners manual and it's hard to read that one too. This Craigs list deal is turning out to be a nightmare.