-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
Need help with old yamaha identification please
-
Similar Topics
-
By Admin
Looking for Honda ATV VIN (Vehicle Identification Number) Number Decoders? Once you find your ATV VIN number off the tag on your Honda ATV, you can go to all kinds of websites that have VIN Decoders available. The best ones are backed by the Honda ATV manufacturer, however there are plenty of aftermarket Honda ATV VIN Decoder websites on the web. This topic will stay pinned and if you find any to add, please do it with a reply.
The following Honda ATV VIN Decoder websites are available where you can just enter your VIN number and it will shows you some of your ATV model details:
CycleVin.com - Use Our Off-Road Vehicle Search to look up ATVs and more!
KBB.com https://www.kbb.com/vehicle-history-report/
CARFAX https://www.carfax.com
autoDNA https://www.autodna.com
VinAudit http://www.vinaudit.com/
decodeTHIS https://www.decodethis.com
VINCario https://vindecoder.eu/
NICB Theft Check https://www.nicb.org/theft_and_fraud_awareness/vincheck
-
By blasirl
I have inherited an ATV and I think it was purchased in KY, but I am in WI. Is there a way to do an online search using the VIN or what have you to try and find the last registered owner so that I might try to get the title?
-
By jwh
I am new to this site. Now down to business, I have been given a Kawasaki 220, tires are trashed and it has been setting for a long time. Do I need a battery in it to find neutral? I know there is a neutral switch and if I shift down(7 times????) then up one using the neutral switch I should be in Neutral. As you see I am in a learning curve here ......coments welcome.
-
.thumb.jpg.170a422ff0757c03ed6c0c36b1d94ee1.jpg)
By mehim
Hi everyone.
Let me explain the thread title.
My husband and I are very active in the nudist community, and we have stayed at many and most of the mainstream nudist and clothing optional campgrounds in the USA. We are now approaching our retirement and would like to start a podcast to share those off the road / backwoods / little known camping areas where nudity is allowed. We have purchased a 5th wheel camping trailer with a rear garage for the ATV and now need some good reports on the one to buy.
We are most interested in a side by side unit but would love to get your thoughts.
Feel free to stop by and say Hi and ask anything you would like to better understand what we are looking for in an offroad unit.
Thanks for reading and hope to hear from you.
-
By PKR
I have had this machine running and put about 4 hours on it but it would not idle great. Would fluctuate between 700 & 2000 rpm and usually quit at the low rpm. Spark plug would carbon off and have to be cleaned. Throttled up nice and ran good in mid and high range. Machine then quit and wouldn't restart, couldn't get it to fire. Checked everything, had spark, gas, etc. Thought spark may be weak so ordered a new coil. Machine sat for 3 weeks waiting on new coil. Installed coil and machine fired right up. Idled nicely until it warmed up and then rpm's were all over the place. It quit after about 20 minutes and then would restart. If I let it sit for a few days it will start but won't idle.
Fuel/air mixture screw does nothing, can be screwed out or in and no change in idle. Only way to keep it idling is to turn the throttle screw way in and have it revving over 2000 rpm.
As this unit sat for close to 14 years I have replaced the pulse pump, carb, CDI, spark plug and now the coil.
What am I missing? I have done all the ohms checks on the stator, pulse trigger, etc and they are all good. I've took the carb apart to ensure it was clean, reset the float to be leaner as plug was indicating it was running rich. Didn't make any difference. Don't know where to look next?
Also can anyone tell me what these wires are for that come off the bottom of the carb (see pic).
Thanks for the help
PKR
-
-
-
Similar Tagged Content
-
- 7 replies
- 3,884 views
-
- 1 reply
- 4,172 views
-
- 5 replies
- 6,526 views
-
- 2 replies
- 2,269 views
-
- 3 replies
- 2,505 views
-
-
Gallery Images
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.