I have ordered a rebuild kit will wait till I get before I open it up. Only setting I have mess with is the idle screw. I have been thinking about the choke, will try that tonight. I did pull the air filter off and I am still getting black exhaust and I put in a new spark plug.
Thanks ALL will let you know what I find.
Yes it is the older style. There are 2 studs screwed into the caliper with nuts outside the cover. Nuts turn and studs don't. Brakes are working now but if I have to go back into them I will but another nut on each stud to get the studs to turn out so I can get the caliper out. Thanks.
I just found one problem, I took a look at my spark plug, it was fouled with black carbon deposits. looked at my manual, it did not have much to say about any adjustments
I have a 86 Yamaha Moto 4 YFM228 that bogs down under load, seems to improve as I go to a higher gear. Does not die but just no power.
new plug
new coil
new pistons and rings, was doing this before a replaced them.
Any ideas
Hi, just picked up a MOTO 4 YFM255 and want to replace the rear brake pads. How do I get to the back. Guessing I need to remove the brake disk, question any easy way to do this?
Thanks