Fish0rDie

Probably was in that range originally. I have no idea though, as one half of the case is the one from the buggy that i bought. The other came from a kid I traded a 3ds to he had a warrior that threw a rod bearing, but i just needed the top end and the case half with the oil drain as that had been mangled. Internals were from whichever looked better, but they were all the same. The stator was purchased on ebay and said that same 97-01 in the listing. The plugs match what are on the harness.

Could you elaborate? How would I go about that. Like from a picture?

Well thats about shitty haha. Wonder why this stuff is being sold as warrior parts then. Makes no sense. Appreciate your input.

That definitely does sound like a big mission lol. We'll take a look at a big bear manual this weekend and do some more testing before reporting back. Should have gotten on here before ordering parts and made sure they were going to be right😂. Oh well, live and learn. We'll make the best out of whats already here. Much appreciated yall.

Said warrior 350 yfm 350 97-01

Might just be because its chinese. They made it like I extended mine, and just used whatever colors they had lying around lol

Oh, nothing that I know of happened. Was referring to the previous owner. His uncle sold it to him with a blown top end, and the kid never got around to it, so it just sat, which is unfortunately what its been doing a lot with me, but work is slowing down right now, so ive got at least an hour or two in the evenings to work on it.

Was told the engine was off a warrior from the guy I bought the buggy from, but I think he said it was a family member that put it together, and it just sat in a field until I got it. Ive been trying to put warrior parts on it, but I guess I must have screwed that up with the wiring, although all the ebay listings say "warrior" on them. Ill have to compare to that manual posted by Mech in the morning. Thanks for taking part in this adventure lol

Thank you for that. Ill check this tonight when I get back with the wife or in the morning before work. Much appreciated. Ill report back

Haha, glad you picked up on that. To be completely truthful, im not even sure I know the exact question I'm looking for an answer to lol. I can only imagine how that sounds😂... The listings for the harness and cdi lined up with one another, as far as model and year, but none of the colors do. All the plugs are right, but that only gets us so far. I will take some better pictures today if i get off work before the sun goes down, and ill type out what colors are where on the cdi plugs. My buddy was over yesterday testing some of the wires with a multimeter, but truthfully we have little idea what exactly we're looking for and where, so if i need to test any specific wires to help figure out where something goes just let me know. Im not getting much of anything on it right now. Wondering if there are some safeties we need to bypass too. Turn the ignition over, click the handle bar button that should engage the starter, but theres nothing, I'm not even hearing the magnet in the solenoid move.

The 4th pic is coming off the stator, and last is the rectifier along with a single red i believe.

https://www.ebay.com/itm/133706447987?fits=Model%3AWarrior+350|Make%3AYamaha&hash=item1f21867c73:g:dXMAAOSwBrRePzzk&amdata=enc%3AAQAIAAABIJO7829WyNck4oHlY5ts2h67E4mguYZz2XEsa%2B%2BodH8LZAchm6TAKP0%2B6ZN%2Fzy8UrFCNULPTqaNsvUUGAoDmFalvsLnl4aUEH4eFvWNMluIXt5i0OZpvnHyp8Gz0lWf2Hea1E3igqLLf3knrGC%2BAQ6SSt0rrbcR75P0n%2Bw%2FPVibyXtB%2F5Ms8fHb%2BHuAdGhodoYnEjOw3MDPOImUYhqyMUPkKl06kNpLXs%2B067eDykrer7rpmuP4%2BMdClysKAhGCAw8v6Gs7Nu8oiK53XMpR7p3PEP0w5hvTaBn5spkdwgoGXC7h6hJZuUsqq192LRkHTmrb3cV5nVZQjXRDb1e35LULbzYXtVwoVVX1a0WV%2BMLU1IsVNEiMpjEByYZ34KkfB2g%3D%3D|tkp%3ABFBM6P2pxK9j This is the one I got. Not this exact listing, but they look the same, and the listing has the exact same title. Give me just a minute, and ill get pics of the cdi plugs and the stator plug.

Well yall, it's been a while. Work has absolutely annihilated me for the past 5-6 months, and ive had bare minimum time to work on this project. Thank you to those that helped previously during the engine rebuild, but now were on to the task of wiring, and let me tell you besides the plugs on the wiring, I am almost completely lost. Bought an ebay harness, and none of the colors line up to what i have seen on any manuals. Its all the 97-01 electronics i believe. Ill post some pictures below of the mess I'm working with. Emphasis on "mess." A lot of the wires had to be extended since the harness was made for an atv and not a buggy. The colors are a little wonky, but I was using what I had, and they were mostly for just extending the plugs, so the colors match on either end. A buddy of mine has been helping me, and we are just at a loss. Looking for general guidance or any wire specific help you could give us. Not even sure if some of the single wires are plugged in right, and we dont have a "lever switch" wondering if thats just for the brake, because the master cylinder has two screws. I suppose a + and -... We also have what I believe are the reverse and neutral sensors to plug in (the only two sensors on the engine) P.S. peep the custom airbox i 3d printed to utilize a lawn mower filter and 2x2 coupling from lowes If you need better pictures of anything, let me know, It's kind of hard to get pictures of this rats nest. Wires that are not connected to anything 4th picture black wire 5th picture blue wire w white stripe left/solid blue on right 6th picture what I believe to be the lever switch from pictures I saw on ebay 7th picture is two black wires coming out of the harness. One we have running back to a black with white stripe that comes out of a different place in the harness. The other that had an end to match the single wire coming from the handle bar switch. Single handle bar wire has a white stripe, so I may try to switch those around if the ends permit it. I know it just looks god awful, but i really do think we are close, and the idea is to figure out whats going where, then figure out how to make it look better, so bear with me haha. Any help is appreciated. Just finished a little go kart for my wife with a predator 212, and gosh do I envy that wiring (there is none😂)

Agreed😂. I will post another update once I get the jug, piston, head, and stator on, and get the thing back in the buggy.

Haha, I'm still around. I posted on a few forums and thought I posted updates on all. It was the smaller gear tower on the left side. I had a parts engine that I was able to swap it out from. I think reverse was out in it originally too, but all is going well at this point. Waiting on parts right now. Needed a new stator, but I just went ahead and got a complete wiring kit along with it. Going with all I think it's somewhere like 97- 2001 electronics. I think the guy before me wired the starter to the 12v source going to the headlights or something. At least that's what I saw. The wiring was a damn mess. Planning another post when I get it completely together. Case is already together, and clutch side is already together.