Quantcast
Jump to content

Lafytafy

Members
 View Profile  See their activity

  • Posts

    27

  • Joined

  • Last visited

 Content Type 

Everything posted by Lafytafy

  1. Lafytafy
    I found it and adjusted them properly it was just hard to see it. Thanks guys!!
  2. Lafytafy
    I have removed the front plastics and the speedometer and I'm able to get to both intake and exhaust but I don't see a T anywhere from the inspection hole no matter how many times I pull it over. The T shows when the engine is at TDC and I just can't see the T stamped on the flywheel. Help me please.
  3. Lafytafy
    Is there another way to adjust the valves on my quad because I am unable to fit my hands between the frame to properly adjust the valves. I have the service manual but I don't want to remove the engine from the bike. Can somebody help me? Thanks!
  4. Lafytafy
    I found the problem!! The shift linkage was worn out and it was traveling to far and slapping the case. Thanks for the help ya'll.
  5. Lafytafy
    Is there any other sort of adjustment i can do without taking the engine out? Thanks!
  6. Lafytafy
    Near the front sprocket?
  7. Lafytafy
    It can't be the gears because it sounds like a shifter linkage or something is slapping the right side casing. I know it is something to do with something hitting the casing though but can someone help me out with figuring out what is hitting the case? Thanks!
  8. Lafytafy
    no i shift it like normal and i dont abuse the heck out of it either
  9. Lafytafy
    Okay cool thanks guys!!
  10. Lafytafy
    Does anybody know which Mikuni carburetor is on an 87 quadrunner 300. Thanks!
  11. Lafytafy
    How and where do I adjust them?
  12. Lafytafy
    When ever i down shift from any gear, it makes a singular loud click or knock and I don't know what it could be. Anybody have any idea
  13. Lafytafy
    I will try that. Thanks Mech
  14. Lafytafy
    I tried what you said and it didn't work. Could it be that the switch isn't getting power to it? I took a wire and touched it to the neutral switch connector and touched the other end to the reverse light wire and the light came on. So could it be that the reverse switch has a loose connection and is not getting power to it? Thanks!
  15. Lafytafy
    Ah ok, I will try these when I get home today. Thanks!!
  16. Lafytafy
    i need some ideas so i dont just buy something not knowing if it will fit.
  17. Lafytafy
    you can find a lot of oem parts on partzilla or ebay thats how get mine
  18. Lafytafy
    my rear suspension is trashed and i dont know what to replace it with
  19. Lafytafy
    what are the setting you have on the carburetor?
  20. Lafytafy
    On my Suzuki, the muffler is very thin and I have tried to weld a patch over the holes but I just melted the metal. my welder is cranked all the way down but still, I have no luck. What do I do?
  21. Lafytafy
    When i downshift from any gear while its running it makes a single loud click noise. Is this normal? If not, how do i fix this.
  22. Lafytafy
    I have checked the bulb and it is fine I just don't know if there are any other ways of making sure before I tear into my quad.
  23. Lafytafy
    When my quad is shifted into reverse, the light on the speedometer doesn't come on. I've dug into the wiring and can't find anything other than it being a faulty switch. How do I get to this switch, is there a way to take it off without tearing it apart? I see that it may be accessible if I take off the air box but I am unsure of this. Thanks!
  24. Lafytafy
    should i run a thicker oil in a older quad because it make a little more noise than usual
  25. Lafytafy
    i need a trustworthy website for parts. Thanks!

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...