thuds4evr

Thanks Ghost GUY, We are thinking along the same lines. I have not found an inline filter so far. Will have to pull the whole back "body" off to get to the carb. My real worry is that screw that I turned and what effect that is going to have. Hate to have to put my bill fold in my mouth and my hands over my head and take it to a shop. T.

New comer; Unit had been running well. Ran out of fuel. Put 2 gal in that I had for a couple weeks. Cranked up and ran well for several days. Started shutting down after start , but would restart and run short distances that I use it for. Went to mail box and did not make it. Changed spark plug . No start unless a shot of start fluid, ran and died. Pulled fuel line off bottom of tank, removed all old fuel wiped out inside of tank, found nothing except stand pipe for normal fuel laying in bottom of tank. Opened tank valve and got fuel in Pri setting.Removed drain screw at carb got few drops of gas. Re-installed fuel line put in about a gal + fuel. Nothing comes out of drain screw. Blew into tank and still zilch. In the process of the drain screw I got on the wrong screw and have made an adj on the carb that I do not know what is. Rigging up to remove body in AM to get to carb. Any one have any ideas suggestions ? Thanks , Tom