gixxerdk

I highly doubt it's stolen but you never know. I'm still in contact with the seller since we're both hunters and plan on hunting together this season. I haven't had time to ask the dealer yet, thanks for everyone's responses

Wow that's expensive

Thank you

Hey guys, I have a Yamaha big bear 250 and was wondering if there was a way to reduce noise levels. Deer season is close by, and walking is out of the question.

So how would I get one for a big bear I bought used? I don't have the most legit bill of sale.. it won't be a problem to get a more official one, though

Thanks everyone!

Your the best haha!

i'm trying my best to locate one for you ...

Thanks! Would similar models work, maybe?

First Welcome to Quad Crazy.

I would check and make sure you have the airbox lid on properly and there are no leaks from there to the carb. Then check the tank and make sure your fuel filter is not plugged or the bottom of the tank. Sometimes on plastic tanks some of the cut plastic can get in the lines and the jets.

The sea foam is great stuff but you really have to run a tank of gas or so before you start seeing the benifits.

Third I would hold off on adjusting the carb until you tried everything else, if it ran fine before then I would just clean the carb and not adjust it. Check the jets and see if they have anything in them.

For your other question, alot of quads have the start in gear feature, try holding the brake (Make sure the brake light comes on) and starting the quad.

Thanks for your reply! Ill wait and see if oxidized has a manual for my year and model and ill start breaking her down.

Thanks again!

My ATV only starts when in full choke even after I let it warm up and ride around I try to lower the choke but will end up stalling. I just put seafoam in the gas tank and will try that out first in about 15 min. I'm just worried that when it gets cold I'll have issues. Also, when I try to lower the choke after being warmed up I hear no difference in the idle. Is there a way to adjust this?

Side question, when I do stall and im in gear its hard to go back into neutral to start it up again. I tried rocking back and forth but that didnt work. After 3 min it went into neutral smoothly.

New here with a 07 big bear 250!!

Cheers

Hey, I'm trying to learn my first ATV purchase and would greatly appreciate a service manual for 2007 big bear 250 2wd thanks