ddiggerr

I'll give it a shot and see what happens. Whats the worse thing that could happen ..... it not work .... well, I'm already at that point

When you say you had to switch the 2 wires, do you mean you went from red to white and white to red or some other combination using the original wires against the new wires?? I'm only asking as I don't have the paper work for this supposedly new stator that was installed in bike before I purchased it.

I will post pictures later today

Hi

Just picked up a BB for $650 as the PO just threw in the white towel. There is no spark with either the electric start or pull start. The stator is new, new battery, new key switch, new plug.

I have gone over every wire and cleaned everything and checked all I could with multimeter.

I'm stumped myself why I wouldn't get any spark with theh pull start.

Could this be the pickup coil?

wires coming out of stator are red and white, green and brown, and 3 yellow wires

I get continuity from red and white but nothing from green and brown or the yellows

Its a hair puller and hoping its just the pickup coil and not the cdi

thanks