Search the Community
Showing results for tags ' inop'.
-
Starting to put my Ex back together since i got the motor back. Most of its together. Everyone who reads this I have attached a copy of the electrical diagram so you can play along. I reinstalled the wiring harness. The only modification I did to that harness was to bypass the clutch switch so it will start with out the clutch lever. I have high beams, low beams and taillight. I can also hear the starter relay click when I hit the start button. I verified that the starter will turn. I can only do it VERY briefly as there is NO OIL in the motor. I just held the button for a split second, probably faster than that. The starter did engage. What i dont have is the neutral indicator light. I verified that the indicater light does work when 12v is applied to it. I am unsure of the condition of the diode inline with the neutral light. I only have a Powerprobe. If you dont know what that is google it. Its very handy. I did verify that I have 12v at each terminal on of the light (Black wire and Light green with a red tracer) whcih really puzzled me. that leads me to believe that its the diode. I also verified that the neutral switch itself does work (physically and electrically) and I see the neutral arm move inside the motor when I shift to neutral. I didnt try to press the switch with it hooked up to see if i get a light. I cant verify anything because I cant start the quad yet so Im guessing right now. I dont think that this problem will prevent the quad from running. The neutral light harness does go into the regulator which worries me. I would rather the light works as I dont want to chase problems later on. Looking at the diagram what am I missing??????