Quantcast
Jump to content

Recommended Posts

Posted

I have a 2011 linhai Bighorn atv 200 it looses power at half throttle and beyond and of course the rpm's drop,I've replaced the cdi, coil,stator,regulator and the Carb,still have a problem

Posted
is it getting enough fuel ?

Yes,just discovered a vacuum line that was partly unconnected this seems to have taken care of the rpm problem ,now it's being hard to start, I am charging the battery and cleaning the air filter,hopefully that will take care of the remaining issue.

Posted

Sorry I had some other pressing matters , rechecked the valve lash intake .005 , exhaust .008 as given to me by another source , since my last post I have found one main vac. line came off , so I put it back and found that took care of the hi rpm issue also figured out the air filter needs replacing as it will not run with the filter on ( you can see the filter flexing ), the problem now is when the bike gets warmed up it will run rough then stall out re start once or twice then wont restart again until it has cooled off , someone told me it could be a bad ring but I"m just not sure , sounds more like something electrical even though the stator, CDI, coil and spark plug have been replaced , what do you all think ?

  • 1 month later...
Posted

Thanks for the input , after checking compression cold and hot I found a difference of 26 psi , after removal of the comp. cylinder and the piston I found damage to the piston skirt and fine groves in the cylinder wall ( deep enough to catch your fingernail on) .After replacing all the electrical components and the carb. I am hopeful that replacing the piston ,rings and cylinder will take care of the problem , I will also be checking the oil screen and eventually the oil pump. When I get it back together Ill update this post.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Adamb2025
      I have a 1990 Honda fourtrax 300 2x4
      I rode the other day for 30-45 min. Switched it off and now it is completely dead..
      battery is fully charged, fuses are good . WILL NOT TURN OVER ,
      headlights won't turn on , No neutral, reverse or oil temp lights . Electrically it is completely dead !!! I replaced the key switch and CDI box , STILL NOTHING.
      I bypassed the neutral safety switch and grounded it to the battery and still nothing !! I used a jumper wire on the starter Solenoid , the motor will turn over but not start . I even bypassed both fuses and straight wired it to see if I could get a neutral light or headlights still nothing . What could it be ?
    • By ButchM
      Hisun 700 EFI. Replaced TMAP sensor had broken off . Fuel pump pressure 41psi. The only way I can keep it running (and runs fine) is to close off fuel return line. 
    • By dkgg5755
      This thing came with a cheap aftermarket carb on it the problem I'm having is it won't start with choke installed into carburetor it will start and get run without it installed then bogs out after about 2 min run time I've checked timing , compression, checked valves for proper clearance , also did a smoke test for air leaks found none. 
    • By 97kingquad
      Okay so I bought this 1997 sazuki king quad from a guy and he had it for a few years. 
      He had it registered and on the trails last year but he said it bogged and backfired when he would try to drive it. so it sat for a year. 
      I bought it for 800 bucks and got it running that night and it ran great for a few days 
      But I parked it the other night and went to start it again and it was really hard to fire up and when I did it was bogging and idling high then low again.
      So I took the carb out and cleaned it (ended up doing it twice because it was still doing the same thing) 
      Now today I have it running slightly better, but it is still like 20% 
      I have been looking it up and trying to figure it out but I can't find the issue, has anyone else had this problem? I'll attach a video of it running and giving some throttle 
    • By davefrombc
      Anyone  carrying  a power box when  camping with their ATV?  I built  a custom  one.  I  used a  marine  battery box that  has 2  50A Anderson Grey connector  outputs (  changed one of the greys to a red), an accessory socket  and2  USB outlets,and a battery  voltmeter ..  I  added a Pure sine wave 1,000w inverter to it and A red 120A Anderson connector to the  output  posts.. To  charge the  100Ah LiFePO4 battery  I  put in the box, I added  a DC to DC charge adapter that I  made input connectors for to allow charging the battery from a vehicle's  accessory socket  or a solar panel.   
      It  was a fun  project.. Besides  having a  1,000w power box for  120V ac , USB   and  12v accessories using the 10 A socket.  I  have  50  A  Anderson connectors  and the 120 A connector  to run  things like a  12v electric outboard   for fishing  trips .  The LiFePO4  battery  only allows a max output of 100A  so  it  can't be used for something like jump starting,  but  it  is half the weight and  delivers twice the capacity of a lead acid battery running accessories..  Commercial pow2er  boxes  don't  deliver  high draw 12v output to run things like  the  electric outboards.   That's one reason  I  custom  built  mine.   One box that serves for both camping and fishing.
       

×
×
  • Create New...