Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

revid

2003 Honda TRX 350 - Not Charging

Recommended Posts

I have a 2003 trx 350 fourtrax thats not charging .I replaced the rectifier last yr and want to know how I can test it or the stator with a multimeter? I tried to download the manual here but the link must be dead cause I can't get anywhere with it. Iam attaching a pic of my meter so someone can tell me what settings cause I don't know alot about multimeters.Thanks

meter.jpg

meter.jpg.0998411bac57fc6442b76c85e5f98fb7.jpg

Share this post


Link to post
Share on other sites


Try reading ACV on the 200 scale. Dont know a bunch about your Honda but Harley which have a rotor-stator system will produce about 28 volts at a fast idle. As the RPM goes up so will voltage. Measure each combination using two of the three wires coming from the stator

Share this post


Link to post
Share on other sites

First , with your meter set to DC and on 20v range like you have it in the pic, read the voltage across your battery.

second, start your atv and read across the battery while its idling. you should read 12v without it running and 14v with it running.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Matt John
      Charging issue?
      I have a 2017 Polaris Sportsman 570 EFI. Yesterday, I start the machine and it says low power (10.6-10.8). This machine is on its second battery. This is a new AGM battery with 50cca more than stock.
      Should I look at the regulator or stator?
      Thanks!!!
    • By JacobSlabach
      recently picked up some project bikes off CL for cheap.  got a honda fourtrax (the ancient 4x4 kind with the straight axle in the front as well as the rear and a back-up kick-start)  plastics are crap, but my goal is to get running like a champ and patch the plastics up and sell to one of my many friends that want a reliable 4x4 for dirt cheap and doesnt care what it looks like.
      so the former owner says it needs carb rebuilt, but its sat for 3+ years since so who knows.  things I see:  carb is missing (he gave me a box of parts along with the bike), engine turns over and feels good with kick-start, brakes need work, battery missing (That always puts me off, cause then I know most likely someone's been tampering with the electrical.
    • By Dmitry Pesko
      Does anyone have an online manual for a 1991 Polaris Trailboss 250? Or, if they could tell me where the fuel shutoff valve is, that would be even better. Thanks!
    • By northernmi
      View File 1985-86 Honda ATC 350X Service Manual
      1985-86 Honda ATC 350X Service Manual
      Submitter northernmi Submitted 03/16/2020 Category Honda ATV  
  • Similar Tagged Content

    • By JPRICE1981
      Hello everyone !! Looking for some help !! Im wanting to check my stator and pick up coil with a ohm meter and cant seem to find a guide that tells me what to read and what my reading should be !! Any help would be great !! THANKS IN ADVANCE !!
    • By reich
      I have a 2005 Fourtrax. It wouldn't shift and the display was blinking three times so I replaced the angle sensor. It initially worked, but now the display is blinking eight times. I did not reset the computer after replacing the angle sensor. Do you think I need a new control motor? Anyone else have this issue after replacing the angle sensor? This is a great site. Thanks
    • By JPRICE1981
      Hello Everyone very new to working on ATVs and pretty sure Im getting ready to ask a stupid question !! but here goes !! should i have oil in my stator compartment on my suzuki 500 ?? this bike is backfiring bad and running rich when i pulled the plug to set it at TDC to check the valves I find that there is oil on the flywheel and Ive never seen this on any other ATV before any info would help !! Pretty sure I already know the answer but if you all could entertain me I would be greatfu !! THANKS IN ADVANCE !!
    • By rider001
      I installed a new stator due to spark problems. I re-assembled the minimum just to start it. Fired right up. However it would not shift, probably assembly error. I am attaching two pics, one is the crankcase left side and the other is the crankcase cover where the stator is mounter. I the cover pic I am pointing at a fork type part with two fingers. How should that be oriented for reassembly?? If you can see something else wrong in the photos let me know. Or could it be where the shifter rod goes thru the crankcase cover, the rod might of gone thru the case hole crooked?? For a quicker response email at byter1 at gmail.com




    • By HappyJack
      Evening everyone
      With my friends, I'm building a one-person track-day car that is powered by an LTR450. One of the problems we're encountering is the lack of amperage created by the charging system.
      Are there any stators that can swap into the LTR450 case to up the amperage? Are there any other methods to up the amperage? Weight is a huge consideration in this, so we can't really run a larger battery.
      Thanks
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...