Quantcast
Jump to content


2000-2001 lta500 quadmaster - is this a ignition switch problem


cfauvel

Recommended Posts

I've been working on two 2000 quadmaster and got the second one running. 

The issue:
With the key in the first ON position the engine starts, and once started if I turn the key one more time to the right (to turn on lights) the engine cuts off as if a kill switch was activated. The lights DO turn on.

Does that sound like a fault in the ignition switch, or an issue farther down the harness?

Link to comment
Share on other sites

Get  a  probe  type  tester  to  see  which  wire  gets  power  when the ignition switch is turned to the first position .  Manfacturers   usually  don't  have  a common  code  for wiring  colours.  Each  model    and  make   have   their  own  codes listed  in their  service  manuals.  Without  one  you  need testers  and  probes to  trace  wires if   the  connections  aren't easily  visible and traceable from end to end .

Link to comment
Share on other sites

FIXED - took out the ignition switch and followed the continuity tests described in the service manual....rather than a KILL, when turning on the lights, the bridge between Red (power) to Orange (ignition) to Grey (lights) skipped the ignition and went to lights solely....took apart the switch and could see crud on the copper contacts, used a brass brush then some 600 grit sandpaper to clean up the contacts and re-did the tests...all good now.

 

whew...although the ignition switch is probably THE cheapest part on this ATV. 

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By mga
      I just saw a video on TikTok where some guy took the rear end off an ATV and bolted on a roto tiller in place of rear wheels. I wish i saved that video to post here....good thing it was 4 wheel drive...lol but, it seemed to work.
      I'm not sure how he made it bolt on to the drive....
    • By jatho
      What is the best engine oil to use for the Suzuki King Quad - also any other tips and tricks I should know before doing an oil change on these bikes 
    • By Clydaho
      2022 Sector 550, 414 miles on it and the gas gauge reads empty.  I topped off the gas and it didn't change.
      There is no fuse that I could find.  No access at the gauge cluster.
      Wiring on the top of the tank looks good, properly connected.
      Could the sending unit in the tank be stuck or broken?
      Has anybody removed the tank lid?  Any tricks?  
      Any other ideas?
      Thanks for any help,
      Clyde
    • By mehim
      Hi everyone. 
      Let me explain the thread title. 
      My husband and I are very active in the nudist community, and we have stayed at many and most of the mainstream nudist and clothing optional campgrounds in the USA. We are now approaching our retirement and would like to start a podcast to share those off the road / backwoods / little known camping areas where nudity is allowed. We have purchased a 5th wheel camping trailer with a rear garage for the ATV and now need some good reports on the one to buy. 
      We are most interested in a side by side unit but would love to get your thoughts. 
      Feel free to stop by and say Hi and ask anything you would like to better understand what we are looking for in an offroad unit. 
      Thanks for reading and hope to hear from you. 

    • By Its-always-something
      Have a 1998 AC 300 2x4, Just installed a new carburetor. Engine starts easy but the choke RPMs are very hi and take along time (5-10 mins when cold out). After engine has warmed up choke releases and it idles and runs fine., It does no have an electric choke. The choke lever is never used and it seems like an auto choke? Long story short, how can I lower the choke rpm levels?
       
      Also, carb came with a spare145 jet, not 100% sure what is installed. Could this impact choke RPMs?
       
       
      Any help and information greatly appreciated.
×
×
  • Create New...