Quantcast
Jump to content

1987 moto 4 no spark

croftclanx6

By croftclanx6
in Yamaha ATV Forum

 Share

Recommended Posts

croftclanx6 Newbie

croftclanx6

Posted
Posted

1987 moto 4 no spark.  

i replaced the coil and plug and plug wire.   visually check all wires and couldnt find anything bad.   i charged the battery  it started after i changed wire and plug an coil rode it twice and it died.  no spark again.   quick someone help

  • Ajmboy changed the title to 1987 moto 4 no spark
Ajmboy Grand Master

Ajmboy

Posted
Posted
1 hour ago, croftclanx6 said:

1987 moto 4 no spark.  

i replaced the coil and plug and plug wire.   visually check all wires and couldnt find anything bad.   i charged the battery  it started after i changed wire and plug an coil rode it twice and it died.  no spark again.   quick someone help

When you say it died, did the battery die because you mentioned you needed to charge it. Maybe it's not charging. Or just wont start back up because of no spark again.

* Topic moved to Yamaha forum and added ATV info into topic title.

croftclanx6 Newbie

croftclanx6

Posted
  • Author
Posted

Yeah it just died like I got no spark out of it so I replace the spark plug the plug wire in the coil there and I charge the battery hell I even hooked it up to jumper cables it turned over and started up ran great shut it down next day started it back up got halfway down the road and it died no again Spark. I recharge the battery and still nothing I don't know what to do I don't understand I would think if it was the pickup coil where the stator or the CDI it would die and not start back up again but it didn't start it it ran great and then shut down

  • 3 years later...
Jerandangel Newbie

Jerandangel

Posted
Posted

I replaced ignition, coil and wire, starter silonoid, still no spark. I've cleaned stator, when I turn kill switch off it still turns over??? Not sure but I dont think that's supposed to happen .  

But would that cause no spark? 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • 88bigbear
      1988 big bear 350 no spark
      By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • cfherrman
      1988 Yamaha 350 Big bear No spark
      By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • LashinWheeler
      2006 Polaris Sawtooth No Spark
      By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • Mikey509
      2000 honda recon battery charging
      By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • Yamahahahaha
      Chain guard solution 1987 Quadrunner LT230E
      By Yamahahahaha
      I'm in the middle of repairing damage from the chain coming off of this from the previous owner. (I learned this is somewhat common on these for various reasons.)
      What are you guys using to either help keep the chain correct and on the sprocket or guarding your engine in the case that it comes off / breaks?
      Is there an upgraded guard that can bolt around the sprocket in replacement of the currently broken OEM alluminum?

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...