Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Beck Beck

2000 yamaha warrior 350 no spark

Recommended Posts

I have a 2000 warrior with no spark bought new stator and pickup coil and still nothing tested to see if power coming from new parts and still nothing could my flywheel be bad help 

Share this post


Link to post
Share on other sites


Have a similar problem with my 2000 Yamaha Grizzly 600.  Went through troubleshooting guide and everything checked out OK.  Last step is replace the CDI, but for some reason they are very expensive compared to the 660s.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Gary Mier
      1997 Yamaha 350 Warrior, should there be oil in the stator area? Have a no spark situation.
    • By Nick Gudex
      Hello I am new to this site and I havea problem. I have a 1987 big bear 4x4 that will not spark. I tested pick up coil per repair manual and I tested my new coil both ok. It puts out 9 volts at the coil but It is reversed polarity. So when I hook my meter up to it she shows -9 volts while cranking. When I put a test light  on it it flashes. Being an electric system this should tell me something but I don't know what its telling me. I have yet to meet one i could not fix but this old girl has me stumped. Any help would be awesome. Thanks to all.
      Nick
    • By Bebe
      Hey guys I'm new here. I have a 88 warrior that has intermittent spark. When I got the bike the guy said it needed a stator.  So I tested the stator and the Source coil has .310,  Trigger coil has .363 an .367,  Alternator side has .05 to .06 on the three. Which all seem in range. I did find that the ignition coil was bad and replaced it. After I  put the new coil on i got spark but only now and then. The bike won't spark while I'm holding the start button,  but as soon as I let off it will spark sometimes. I ended up unplugging the voltage regulator and it will spark every time I let off the start button, but still will not spark while I'm  holding it. What could this be?
       
    • By Jeff Cotter
      I recently purchased a 2000 polaris xplorer 400 4x4.  When I bought it the starter was bad, speedometer didn't work,  and it had been sitting for 5 years. I replaced the battery, and starter. Changed all fluids, and got it running correctly.  Then replaced the speedometer in an attempt to make sure the awd would be available when needed.  And took it out for a couple hour ride with a buddy.  
      It ran great that ride with no serious problems just a little carb issues which I was able to take care of on the trails.  Then a couple days later I decided to take it out for a ride by myself,  again ran great no issues other than a couple times it seemed to cough and then take off again.  That day when I was loading it I noticed coolant dripping onto the trailer and the overflow bottle was empty.  
      Got home and decided to drain the counter balancer, when I did that I got about 3 cups of coolant. Im guessing that it needs new seals and all for the water pump.
      My question is how difficult is it to do the water pump and should I attempt it or should I send it down the road to the polaris dealership to get it done? 
       
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...