By
Feehan
I bought a bear tracker off a friend who said it last ran a year and a half ago. He was going to use it, went to use it and it wouldn't start. He took it to the dealership, and they told him it needed $1200 worth of work one of the things being it needed a new stator.
I bought an aftermarket stator and in put it in, rebuilt the carb and changed the oil filter, installed a new petcock and gave it a new battery (voltage is 12.8) and oil.
I turn the ignition on and I see a green N light on. I turn the ignition switch to run and push start and I hear the click of the solenoid and the starter cranks but the 4-wheeler never turns over.
I have pulled the spark plug and have ground it to the motor housing. I try push run, but I do not see any spark from the spark plug, not even once.
What should I look to next? I can't for the life of me find a CDI box on my model. If I do it must look and be at a different location of where I am looking, nor can I find a CDI at any parts store which leads me to believe my model doesn't have one.
Please excuse the ignorance as I am new to this, but I do have a rectifier and ECU that I do so.
Any help would be greatly appreciated, I just don't know what readings I should be getting from the pickup coil, stator, ignition coil, etc.
Thanks in advance for any assistance you may be able to give!
By KdlH
By Feehan
By DaleJAM
By Need-help-with-quads
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now