Quantcast
Jump to content

Recommended Posts

Posted

So I rode my 2018 Kodiak 450 through a bit of a puddle and got water in the ultramatic casing... drained the water but the quad still fails to reach top speed so I figured it's time to pull the sheaves and clean them out.

When I pulled the primary sheave off, this rubber piece fell out that I can't find anywhere on the parts diagram nor where it might have come from. Any ideas?
Note, it looks worn down on an angle, so wherever it came from it might have been jammed in the sheave and that could have been what was preventing me from reaching higher speeds.

Any help is appreciated.

KzcGLj.jpg

vtUEya.jpg

DlZyHr.jpg

Posted

I'm thinking this is some kind of damper, just not sure from where.

It is almost identical in shape and size to the dampers on the seat, but all four dampers are on the seat and they aren't angled at all... search continues.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By crankin
      I have a 1997 Yamaha Big Bear 350 4x4. It used to start right up. Then all of a sudden it wouldn't crank. I have a schematic for it so I started tracing the problem. I had no power at the starter solenoid. According to the schematic the power comes from the neutral switch and through the starter circuit cut out relay. I cannot locate the cut out relay on this machine.. If I apply power to the relay it will crank with the start button.
      The neutral switch is hard to get to with all the brackets on this thing. I did find out from all my research that if I apply the rear brake lever it will start.
      Does anybody know if the cut out relay exists and where it might be found?
    • By quadnut20
      Just picked up this 2025 Kodiak 700 esp and was wondering if anyone has any suggestion on up grades i should look into  ?? I did a EPI clutch upgrade and put bigger tires on it but want to do more !! 

    • By harryjr
      hello everybody my name is Harry jr and i recently picked up a 90's Yamaha moto4 225 i beleive and neede a starter was all he said ( i know right ) thats what they all say
      anyway i picked up a starter and installed it and when it is crankling it sounds as if it is not turning over freely as i9f there was a one way bearing not worrking correctly so pulled with recoil and it pulled back so hard i ripped out of my hand so hard it actually hurt now i have pulled and kicked a lot of bikes and such but never felt anything quite like this you can hear it try and fire and kick back but still acts as though somthing holding it back does that make any sense to anybody is it flywheel key , or valves wauyout any help would be great i picked tow of these up for $100 and tring to fix so we can ride as a family thank you in advance.
    • By BillR94
      I suspect this bike may have a bad speed limiter. The part number for is 4060204. I found this one on ebay but it has a part number that is 1 number different. (4060203). It has the same LR44-2 and says its for a 94 Magnum 425. Will this one work on my machine or do I absolutely have to have the 4060204? Your advice would be appreciated. Thank you
      https://www.ebay.com/itm/326817022020?_skw=Polaris+speed+limiter+LR+44-2+4060204&itmmeta=01KF74RJDTYSQNAP11RNJHCRQQ&hash=item4c17d00044:g:IRYAAeSwfO1o7eFo&itmprp=enc%3AAQALAAABAO7PUuNWmJ%2B%2BUShgI9tQz%2Fp%2FPZwHFglDA7v--td9bxBP05QJN8jM6A97tWp7MfGdxP%2Fo9vRaFVpxhV0%2B86jsb4r1WPwXcF%2FLp132KMxBdyLCSwt%2FtSvxD4%2B2RhmZOKzQYHqX0tNsUT1cqqf1TT0TxauZTveHSqgA8UlZ3Qb3ALQlGIIFiaiXjpWNHwRUnyNGKvI5gDVtbwv7eIrkF8m42Bvb75n4dwn0jTJyLPLZveJMPDcjlyHha0wv1Q1JbVnF%2FxxfSi2ros0dbFHRLsBpdH0TT9LNoSTtump3ZDZ%2BA9xqfasfcwHrDJzDX2BDC9Jx8NZeI%2B3mcvOJ7H8qPpwW7OY%3D|tkp%3ABFBMhKfi5Plm
    • By BuckBilly
      Just thought I would start a poll on this topic manly because I'm not a fan of belt drives. Just want to know which you prefer.
×
×
  • Create New...