Quantcast
Jump to content

Recommended Posts

Posted

Hello all!

A friend of mine has this particular 4 wheeler. It sat in the garage for about a year, so I redid the carb, cleaned the tank and installed a new petcock. So far, it cranks right away whether its button started or pull started. So I have a couple of questions concerning the carb and air filter.

1. Is this a cvk32 250 or 350 carb? As the air fuel ratio adjustment is different according to a cvk document I read. What's your adjustment setting? 2 whole turns and a 1/8 or 2 whole turns and a 1/2? Comparing the old setting on the carb to the new setting (and where the needle sits now), makes me think it was way off before. 

2. The Air filter cover, gasket, air filter and plate element are all missing. So I was thinking of removing the hose that goes to the air box and put one of those K&N style looking filters and be done with it. So my question is.. will I have to readjust Air Fuel screw or just adjust Idle?

It's just going to be driven around the neighborhood.

Thanks in advance for any info or help. Y'all stay safe out there!

  • Admin changed the title to 2000 Kawasaki Lakota KEF300, Carb & Air filter Questions
Posted

Welcome to the forum.

1. I usually go 2 turns and then adjust by ear where it's the happiest at idle.  That may be anywhere between 2 and 3.

2. You'll probably have to readjust fuel screw.  Not having the resistance of an air filter on the carb messes with everything.  If the only remaining piece is the hose that goes to the box, try to use that with a filter on the end.  The air filter is better off further up towards the back shielded than it is close to the hot motor.  Carbs aren't a fan of hot air...the cooler the better.

  • Like 1
Posted

Alright! Thanks MarkinAR!

Appreciate your Informative response. Didn't even consider the colder air for the carb. Thanks again for the info and the welcome.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By RadRob
      I am new to this site. I have a 1987 Suzuki LT230S Quadsport I think. Is there a difference between quadsport and quadrunner?
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By Trent Finnessey
      So I’ve got a 2000 Honda 400ex absolutely love it!! I’ve had it for about a month, I ride with bruteforce 750’s, outlander 850’s and 1000 sxs’s and I was thinking of getting a trx450r carb and a full hmf exhaust. And probably doing the air box mod too, how much power would this give my 400? Just a little different or a big difference? Cuz if it’s not much of a different I’ll just stick with my dg slip on..... thanks!
    • By DPDISXR4Ti
      I hadn't driven my Kodiak for a two months, and since it was low on fuel, the first thing I did was filled it up to maybe 7/8 full. Getting ready to start it, I rotated the fuel selector switch to "on" and within seconds I smelled and saw fuel dripping onto the floor. I quickly turned it off and the fuel gradually stopped - I can repeat this.
      The fuel is flowing from the hose that is connected to the bottom of the carb, and routes around to the left side toward the wheel well. Any idea what's going on here? It ran fine the last time I had it out.
      Thanks...
×
×
  • Create New...