Quantcast
Jump to content

Recommended Posts

Posted

I just bought these in the fall as a pair and of course they were running awesome with no problems at that time.

  1. One of them now will only start with starting fluid. It runs great once it's started, but absolutely refuses to start without a squirt of the good stuff. 
  2. The other one starts just fine, but dies after it gets warm. The only way to keep it running is to keep the throttle up. It won't run at an idle, and keeping it running has the throttle too high to shift. 

Any ideas or suggestions are very much appreciated!!!

Thank you,

John from Shelley, Idaho

Posted

Both sound like carb issues.  Modern fuel has ethanol and it starts to break down about 2 weeks into it's lifecycle.  When ethanol breaks down it draws water from the atmosphere.  Drain and flush the tanks, clean the carb, refill with fresh ethanol free fuel.  Pretty sure both will be back to normal.

  • 4 months later...
Posted

Make sure to clean the main jet and the emulsion tube and all its ports. Number 1 issue does seem to be water in the float bowl but also change the filter. Number 2 sounds like valve clearance issues. What's the mileage on the second one. If over 1000 then its past due for a valve lash check. I think it's like .004-.006

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...