Quantcast
Jump to content

2004 Suzuki 700 twin peaks noise

Hunsaker Tim

By Hunsaker Tim
in Suzuki ATV Forum

 Share

Recommended Posts

Hunsaker Tim Newbie

Hunsaker Tim

Posted
Posted

2004 700 twin peaks 

When i get to about 10 mph i get a very (tinny ) noise from the right side of the engine / clutch area.

originally I thought maybe something got caught between axle and skid plate ie : rock and was just rubbing producing that sound.

I took off the skid plate and drove it and still had same sound.

Checked the lug nots and they were a bit loose , tightened them and still same noise.

Took off the what looks like an inspection plate on top of clutch cover and looked inside this apart and it is dry of any fluid.

Not sure if there should be any fluid in there or not had clutch replaced 2 yrs ago with nominal riding since.

I do not have the time or knowledge to take this apart and try and diagnose. The only repair areas around here are absolutely terrible.

The shop I normally do the work are 2.5- 3 mos. behind. Any suggestions would be greatly appreciated.

Thank, you

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • canamKID
      2013 outlander max xt 650 loud whirring noise
      By canamKID
      Anybody familiar with this noise from my quad? Just started.  It temporarily goes away when I attempt to shift into another gear but shifting has gotten harder too.
       
      Thanks
      20260711_150338.mp4
    • logray
      Looking for Quadrunner Flywheel Starter Clutch Gear race diameter
      By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • quadnut20
      Up above Empire Colorado !! The jeeps like this area with all the rock trails
      By quadnut20
    • HeWasRidinDirty
      2004 DVX 400 fuel issues
      By HeWasRidinDirty
      I rebuilt the carb on said machine. When I hook up the auxiliary gas tank it runs fine and everything is cool. When I put the fuel tank on and hooked up the lines, it completely flooded the cylinder and even about an inch of fuel in the air box. I'm pretty sure that it comes from the little hose on the petcock and hooks to the top of the carb. WTH is that even for? I mean the thing runs fine on the auxiliary tank, so idk And on the petcock when it's in the "on" position, I get no fuel. The petcock from the bike I took it apart and checked out how it operates. The sharpie marks indicate how it really works. Now the other petcock w/o the sharpie marks is an old one that was leaking that I removed from a Polaris quad. It's exactly the same thing, except the small hose and nipple have been removed. I'm so confused, LOL
       

       
    • quadnut20
      Clutch mods !!
      By quadnut20
      Just picked up a 2025 Yamaha Kodiak 700 fixing to do a EPI Clutch mod to it since I dropped bigger tires on it !! Air box , exhaust , and programmer next ! 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...