750 Kawasaki Brute Force

[coolcooch]

 Hi everyone....I have 2006 750 Kawasaki Brute Force, my belt light came on, checked the belt, all's well there, I done this once before a long time ago, so long ago I can't remember how or what has to be done to get the light off. Yes I do have a tech manual, spent a lot of time looking for my answer to getting the light out, no luck. Too anyone that can help with this it would be much appreciated....Thanks

[Impala_ss]

1) remove seat, unplug black and grey 4-pin connectors
2) swap plugs, grey to black and black to grey
3) turn on ignition switch, belt light should be flashing quickly
4) disconnect 2-pin belt switch above torque converter cover, belt light should be flashing slowly
5) let flash for at least 5 seconds
6) turn off ignition switch
7) reconnect 4-pin connectors black to black and grey to grey, reconnect 2-pin belt switch
😎 turn on ignition switch to confirm belt light is out
[/b][/quote]
"the reset procedure is similar to 650 700. Unplug 2 pin conector going to belt switch. Unplug black conector under seat , unplug white conector beside it ( white plug is a reset plug which has no wires conected to it from machine) Plug reset plug into black plug turn key to on , turn off. plug everything back to stock. You are done."

or

1) remove seat, unplug black and grey 4-pin connectors
2) swap plugs, grey to black and black to grey
3) turn on ignition switch, belt light should be flashing quickly
4) disconnect 2-pin belt switch above torque converter cover, belt light should be flashing slowly
5) let flash for at least 5 seconds
6) turn off ignition switch
7) reconnect 4-pin connectors black to black and grey to grey, reconnect 2-pin belt switch
😎 turn on ignition switch to confirm belt light is out