Do you own an ATV or UTV? Join our Forum!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
Hi all, new member here.
Picked up a really cheap non-runner last night from a neighbor. He had gotten it from someone else who had rebuilt it a few years ago and it has decorated his garage since.
It is an early-90's (1992 or 93?) Suzuki LT250, but the weird part is the engine is a neon green color. I am now wondering if someone swapped the original motor out of this quad. Does anyone have experience with these that could give me a pointer as to what this could have come out of? I have heard that some Arctic Cat models had the same Suzuki motor - could that be where this came from? It is a 2WD, and has the typical chain drive/RWD system with both front and rear (rear drum) brakes. Very little rust and mostly complete, for the price I paid it isn't bad, but I am not sure how to pinpoint the engine type, and I would like to have that figured out.
Just want to make sure what I am dealing with before ordering parts. I will need a carburetor by the looks of things, and air/oil/fuel filters, plugs, etc.
Thanks in advance for any help, appreciate your experience with these quads.
So this’ll be long I’ll give all the background first to see my issue skip to the ***
Hey I picked up a pit bike and a foreman for 800 the pit bike was running but the foreman was locked up. Sold the pit bike but when I took the top end off the piston I only found half a piston left. So knowing the rest of the piston was down in the crankcase I knew it had to be pulled and gone thru completely.
to pull the motor I went ahead and pulled the rear end off and unbolted the front diff to pull the drive shafts and pull the motor. Now I have the motor torn down completely and have all the parts of the piston removed. I know the rod and crankshaft is shot (heat discoloration and too much up and down play rod to crankshaft).
***so I’m wondering while I have the motor apart what should I check for? I know this motor died from heat as the oil in the head smelled like popcorn. So what should I check to make sure I fix the issue (overheating I assume) and not just the symptoms (blown up motor lol).
so put simply I don’t want to just rebuild the motor to have it overheat and repeat the process after 5mins of running
Here’s some pics
By Susan Makowski-DeGraw
My quad runs, it starts up runs for about 10 minutes and then it dies if you let it sit for 10 minutes it’ll start back up ride for another 10 minutes and then die again, trying to figure out why it keeps stalling
Recently Browsing 0 members
No registered users viewing this page.