Quantcast
Jump to content

Recommended Posts

Posted

Hey guys I just picked up a 2003 Kawasaki Lakota 300 sport last night i noticed today the foot gear  shifter was loose so I tightened it a drop now i see a leak  right around where the shaft  goes in trans.Is this a easy fix? Is there anything I can use temporarily to seal it Im sure it would get less in the colder weather or maybe with a thicker oil may slow it up so is there a temp fix for now ??

image.jpg

Posted

I actually had a box of metric seals and i kind of slid it in because the seal was deff missing when i put shifter down it would move so slitly probably where seal goes so i put a seal on it and it slid right in hopefully it stays but im going take it appart soon and do it the right way if it leaks again thanks for responding!! Next I have the recoil starter to put back in I have the spring and wheel so i need the rope amd to take off cover and actually see whats in there lol Its a pretty good quad so far Obviously the blue one the red one is my never die 86 Quadrunner 

78C67EB3-26B0-4794-A208-E731C0A09114.jpeg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • By Maxg_57
      Is anyone still active on this club
    • By Shorty51
      Good morning, I am new to the forum. I'm 75 years old and love getting ATVs back to usable condition. I particularly like the 2006-2009 Arctic Cat 250 Utility. I currently own 6. The 2006 I am working on only has reverse and low gear. The "drive shaft" in the transmission is completely stripped where the high gear would mesh. Has anyone on here replaced the shaft. I'm told I have to split the case. I was hoping that someone on here could let me know how hard it will be. I already have it stripped down to where the shaft coming in from the clutch side is the only thing left. I was hoping I could just remove the driven clutch and drive it out from there. Directions say different. Any help would be greatly appreciated.
    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By P_syko
      Which is more reliable? Shaft or chain drive? 
×
×
  • Create New...