Quantcast
Jump to content

Recommended Posts

Posted

Went out to start the KG, and it started with no problem, idled for about 2 minutes and then died.  Will crank but not start.  Shot some starter fluid and started but then quit running.  Assumed a fuel delivery problem.  Separated the gas line before the fuel filter, cranked the engine, and no gas coming thru the line.   Questions:  Should I be getting fuel pumped up thru the line when disconnected?   I did check the pet cock and it is working as it should.

Any other suggestions you all might give me to check.

Thanks everyone.

Posted

Turn the fuel tap to prime if it's a vacuum operated tap,  pull the fuel pump's vacuum hose off the carby and suck hard on it, and when you let the vacuum off the fuel should come out of the fuel hose as a full diameter slug of petrol. Be cautious when you suck the hose because one possible problem is that the fuel pump's diaphragm might have a hole in it and you might get a mouthful of petrol. If the fuel delivery is a full hose diameter pump of fuel, then the pump works. You need to have the hose laying horizontally into a bottle to get a good idea if it's a full flow.  If that works then you need to check there is plenty of vacuum at the carby and that it's getting to the pump. There might be a hole in the vacuum hose.

  • Like 1
Posted

When the motor's running, the vacuum is in pulses but not as deeper vacuum as what you can suck, so in operation the fuel flow is more of a trickle...If you put the vacuum hose back on, and hold the fuel hose horizontally in a bottle with the motor idling, there should be a steady approximately half flow of fuel.  By that I mean it will be sort of half the hoses diameter, but trickling out steadily..

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...