2006 Suzuki Ozark 250 Electrical Issue?

[alexwv1863]

So, I've been working on my 06 Suzuki Ozark 250. Yesterday I tried to put a new key switch on it and I'm not getting any power to it. The 4 wheeler will start and run if you use the pull rope. I checked the 2 fuses I found on either side of the solenoid and they were fine. Im not sure what I need to check next. Electrical issues are not my strong suit, so I would really appreciate any help. What should I look at or try next? Thanks. 

[Mech]

Kill switch ?

Look at a wiring diagram (in a workshop manual, obtainable on here), and see where the power goes before it gets to the key.. It might go through the kill switch before getting to the key. Start from the battery in the diagram and follow the color to the key. Or, it's got a broken wire. Again, refer to a wiring diagram and see what color the wire is from the battery to the key(red I reckon) , and if you have a multimeter with a buzzer continuity setting, use that to trace/check for continuity from one end of each red wire(if it is red) till you find one that's broken.

Edited June 7, 2022 by Mech