Quantcast
Jump to content

Recommended Posts

Posted

I have a 1998 Yamaha Timberwolf 4x2 that I recently noticed a pretty heavy oil leak. I discovered that it was coming from the shift shaft seal. I can’t find anything specific to this atv, (or others), on how to replace it. I found several videos on motorcycles and the fix appears simple. The problem is that the shift shaft on my Timberwolf runs through a metal arm welded to the engine, so I can’t slide the seal over the shaft. (Picture attached). Can anyone please steer me in the right direction. Thank you BCE1A25A-FCC3-47A3-BCED-0F25FCFE3CD4.thumb.jpeg.82a97941efd0c3d28ac73225eb8a8baa.jpeg

Posted

There might be a manual in here..  Up the top, "more", service manuals, then in the new page a way down on the right choose your make and have a browse.

The way it's probably meant to be done is to take the other side case off and undo a circlip or something and pull the shaft back through.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By wanrep
      View File 2019-2024 Yamaha YFZ 50 service manual
       2019-2024 Yamaha YFZ 50 service manual
      Submitter wanrep Submitted 05/04/2025 Category Yamaha ATV  
    • By wanrep
      View File 2017-2018 Yamaha YFZ 50 service manual
      2017-2018 Yamaha YFZ 50 service manual
      YFZ05YYXH
      YF05RH
      Submitter wanrep Submitted 05/04/2025 Category Yamaha ATV  
    • By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • By Gwbarm
      Does anyone have a recommendation of a really Heavy Duty ATV cover. I have bought several and they do keep the water off somewhat, but they are very thin and do not contour with the shape very well and water pools up in the rack louvers. I think i may be looking for a heavy canvas one, if anyone has a recommendation it would be greatly appreciated.
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
×
×
  • Create New...