Quantcast
Jump to content

Recommended Posts

Posted

I have a 2005 Honda TRX 400EX that will not move starts fine runs fine but when I try to go it just revs and forward and reverse will not move at all could it be the clutch? Or something bigger than that?

Posted

It's probably the clutch.

If the clutch wears out it generally gives plenty of warning though.. Has it been slipping for a while ? If not then are you sure it's going into gears ? Does the shift feel right ? Have you tried it in all the gears ? Are there any bad/strange noises coming out of the gearbox ?

Have you checked the clutch lever down on the case is free and going right back when you let the lever on the bars out ? Have you tried adjusting the clutch ?

Unless there are bad noises or a bad feeling shift on the lever then I think you need to take the clutch cover off and have a look..

Posted

Everything is functioning and no odd or bad sounds tried every gear including reverse it just won't go. Do u know if the trx300ex parts are interchangeable with the trx400ex they are both 2005(and just wanted to correct the post is about a trx400ex that won't go )but I have a 300ex that's dead and hopefully for parts if the are interchangeable

 

Posted

Look a part up in partzilla, choose the part by clicking on it's part number and it takes you to a new page, scroll down and it shows you what other model bikes that part fits..

https://www.partzilla.com/product/honda/22201-MAL-600?ref=55fce17ac7eed84d89c966db8609111a28a4e5d1

Did this problem come on suddenly, or just gradually over months get worse. Clutches normally take a long time from the first signs till they won't drive any more. Something might have come loose or broken.

And no, it seems the 350 and 400 parts do not interchange..

https://www.partzilla.com/product/honda/22201-MAE-000?ref=46d9e4043d48249bcc0c6c974c5fbed382aaf225

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • By Mikey509
      Hey guys i recently got a old recon 250 up and going and the prev owners had the carb screws all messed up. i was wondering if anyone can give me the basic run downs on if i turn both screws all the way "tightened" how many turns out will the quad run okay so i can then dial it in. the prev owner had the screws messed up so bad it woudnt idle. i got it to idle but idles rough. its super lean any guidence is appreciated 
×
×
  • Create New...