Quantcast
Jump to content

2008 big bear 400 safety interlock to start in gear

Rockbottom
 Share

Recommended Posts

Rockbottom Rookie

Rockbottom

Posted
Posted

Any body have a part number for replacing the safety interlock on the left brake so you can start the engine with the brake handle pulled and in gear

or how to bypass this function so you can start in gear

thanks ahead

Gwbarm Grand Master

Gwbarm

Posted
Posted

There is a small switch on the left brake lever when you pull the brake the switch makes contact and you can start in gear, switch may be bad. I have never bypassed it i like to keep all safety switches in place.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Popular Now

  • Similar Forum Topics

    • jen
      Trail Food safety
      By jen
      Wow...I packed a small soft side cooler with an ice pack  at -4 F and inserted my Type K thermocouple sensor inside so I could monitor the temperature without opening.  After 3 hours  the inside temperature was 60  F...OMG!   The ice pack  was solid frozen.   Standard temperature for safe storage is < 40 F.     What I found by asking was that there should be no air space in the cooler.  Packed with Ice preferably ice from connivence store (normally 0 F of less).  Food should take up  short day trip1:1 ratio.
      Good coolers are expensive.
    • realpilot
      1999 Ranger 6x6 no start
      By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • logray
      Looking for Quadrunner Flywheel Starter Clutch Gear race diameter
      By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • OldATVowner
      99 Bear tracker no neutral or reverse light or start button
      By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • rjsummer
      Suzuki LT185 electric start question
      By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...