Quantcast
Jump to content

Wide Rear Ends - YFZ450 Axle Install - How-To

quadcrazy

By quadcrazy
in Yamaha ATV Forum

 Share

Recommended Posts

quadcrazy

quadcrazy

Posted
Posted

Wide Rear Ends - YFZ450 Axle Install - How-To

atvp_0804_01_pl+loosen_rear_lug+.jpg

Do It YourselfIn our October 2007 issue, we had just finished installing a set of wide A-arms on our Project YFZ450. To complement the width of the front end, we also received a rear axle from Leager Racing. Many people wonder: "Since the front of the quad is already wider after you do an A-arm install, will adding a wider axle really make that big of a difference?" Well, yes it does.

Photo Gallery: Wide Rear Ends - YFZ450 Axle Install - How-To - ATV Rider Magazine

Read More | Digg It | Add to del.icio.us

More...

index.html

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • Jdeaton011989
      Timberwolf 250 starting issue
      By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • joshualutz
      reviving lt80 project for my boys
      By joshualutz
      so we got this little lt80 given to us when we bought my sons dirtbike as kind of a throw in gift it was just sitting not being used and my youngest fell in love with it so the gentleman we bought the bike from said we could take it as well for a little project 

    • TomJulio
      Wanted- Honda TRX300 front wheels -2WD
      By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • USRaider
      New Guy, Busted 2000 Suzuki Quadrunner 500 Project
      By USRaider
      Hello all!
      I was given a 2000 Suzuki Quadrunner 500 (Quad 500 Runner?) and its current state is a bit of a mystery!  
      Kept indoors but hasn't been run in 5 years.  We're not trying the engine until the gas is replaced, and the tires are reinflated. But the previous owner said their only issue was stalling when shifting to reverse without giving some throttle.
      I'm optimistic!  See y'all around!
    • gordonmacritchie
      honda trx 500 fm foreman 2012 no start issue
      By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...