-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
-
Similar Topics
-
By Filthy_Mule777
I'm currently pulling my hair out over a customers 98 bayou 2x4 KLF300b. I've changed every electrical component on it twice and in a couple instances three times. Still no spark, I am baffled. Initially customer brought it to me complaining of a hard start no start situation and in fact, it wouldn't start. I changed the starter relay, spark plug, CDI box, and starter circuit relay after which it fired right up ran very well but then started having issues with the neutral switch/light where it wouldn't come on and wouldn't allow it start or even turn over. I found in the wiring harness a loose connection, I got it taken care of and secured and that solved the problem. So now that it would crank up again and run fine I called the customer over to test it out see what he thought as I've never heard it run before and I wanted to get his opinion on how it was running. Customer ride it around a little bit pulled it back on my carport and turned the key off and said it was great, and had never ran better or started so easily, then we set up a time for him to come pick it up the following day and he left. Well where he pulled it on my carport and shut it off was in the middle of the carport so I jumped back on it to park it off to the side, crank it up no problems put it in reverse went about maybe 18 inches and it stalled and ever since that point it has not had spark or run. I replaced the CDI box again with a better brand, I replaced the ignition coil twice put another starter relay on it and I've also changed out the stater and the pick up coil (pick up coil twice) and I'm just I'm lost I don't know what else to do to it. I've had this customers four wheeler for four months now whereas he's a patient guy I need to get it out of here so I can move on to something else. I've seen dozens of threads across different sites for off-road, 4 wheelers, ATVs, UTV's, whatever and they are all experiencing the same sort of issue but they never ever post hear the problem was or the fix. So I'm hoping somebody here has a little bit of knowledge on this particular issue sent since it seems to be so widespread. Thanks in advance for any help or suggestions.
-
By ATVNetwork
Round two of the ATV Motocross National Championship Series, an AMA National Championship, (ATVMX) remained South and set its sights on returning to the Gatorback Cycle Park facility in Alachua, Florida. The return to this track had racers excited about getting onto the second round of AMA Pro Racing, and would be the season kickoff for amateur, youth and vet racers as a full schedule of racing was scheduled. View the full article
-
By BuckBilly
Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Let's see if we can make this a daily event.
-
By atvgenius
ATV Genius is the nations largest retail powersports distributor. What sets ATV Genius aside from others is we not only supply to dealers but we are also open to the general public. Wholesale ATV buys directly from the manufacturer, we cut out the middle man. Not only allowing us to save you money but allowing us to offer higher quality, longer warranties, and rare sought after vehicles.
We pride ourselves in our friendly, family like service & sales you will receive when coming into one of our stores. We also have higher experienced service techs that will not only be assembling your vehicles but servicing them as well.
Interested in becoming a dealer, or buying for yourself? Contact us today! Reduced prices!
www.atvgenius.com
-
By gatorschevy
I own a few older quads mix of kinds a couple of Yamahas, a Honda, can-am a Kawasaki, they are older quads but in good shape the question of the day is....... what's the best way to polish up the plastic?
I have found that Dollar General mold remover is good to get the black stuff off the plastic works good, but was wondering how you polish up the plastics on yours.
-
-
-
Similar Tagged Content
-
- 0 replies
- 1,839 views
-
- 3 replies
- 2,139 views
-
- 1 reply
- 2,432 views
-
- 2 replies
- 1,919 views
-
- 1 reply
- 1,686 views
-
-
Gallery Images
-
By dirtmerchant42,
-
By mannyortiz7,
-
By SeanKing,
-
By CK1999_400ex,
-
By George Henry,
-
By nyatvrida91,
-
By mannyortiz7,
-
By blahhhh,
-
By mannyortiz7,
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.