Quantcast
Jump to content

Recommended Posts

Posted

my buddys 02? warrior cuts out as soon as you give it throttle. it stays running, but it missfires and pops through the exhaust. it returns to idle and idles fine. the timing looks ok and we have swapped the carb with no change.its been sitting a while waiting on carrier rebuild, it ran fine before that. any ideas?

Posted

no inline filter. doesnt change with swapped carb. nothing in motor has been changed nor carb. exhaust smells a little like gas. im thinking maybe an electrical problem, maybe a rev limiter? thanx for reply, cool pic!

Posted

What is really throwing me is that it idles. If it was a CDI problem or something I don't know that you would even get it started.

How does the air box/air filter look? It maybe starving for air, possible it is getting enough air to idle but not for the increased load. Mice like to make nest inside of air boxes. I have a friend that practically sucked an entire nest into his motor.

  • 11 years later...
  • 2 years later...
Posted

if the parking brake switch is engaged the computer cuts throttle because it doesn't want to allow full capabilities if you were to hit the trail causing heated brakes and a struggling engine, kinda like a failsafe

 

 

 

 

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By Rockbottom
      Replaced stator now red reverse light stays on in all forward gears and when neutral light in on 
      When put in reverse the light goes out
      any ideas how to correct
      thanks ahead
       
       
    • By Damien911
      Setting the timing on a 2005 Yamaha 250 Bruin
    • By Rick Shropshire
      I recently picked up a  2000 warrior 350 and it doesn’t have the air filter box so I was thinking about using a clamp on filter directly on the carb.  Anyone know what I need to get or where I can find it? The one I ordered goes in the box and won’t fit directly on the carb.
    • By 97kingquad
      Okay so I bought this 1997 sazuki king quad from a guy and he had it for a few years. 
      He had it registered and on the trails last year but he said it bogged and backfired when he would try to drive it. so it sat for a year. 
      I bought it for 800 bucks and got it running that night and it ran great for a few days 
      But I parked it the other night and went to start it again and it was really hard to fire up and when I did it was bogging and idling high then low again.
      So I took the carb out and cleaned it (ended up doing it twice because it was still doing the same thing) 
      Now today I have it running slightly better, but it is still like 20% 
      I have been looking it up and trying to figure it out but I can't find the issue, has anyone else had this problem? I'll attach a video of it running and giving some throttle 
×
×
  • Create New...