Quantcast
Jump to content

Recommended Posts

Posted

Tuning is very important when using a forced induction system. Make sure you start with a rich carb mixture. You will need to increase your jet sizes quite a bit to get the extra fuel you need to go with all the air that the turbo will be cramming into the motor. I would guess that the turbo kit should come with new jets, possibly a bigger carb too. If you don't get enough fuel, that motor will be toast in no time. As far as how it will run with the turbo system properly installed, I think that it will be something like a raped ape with rabies on steroids.

Posted

There are some videos on Youtube. I'm interested in your results, keep us posted!

[ame=http://www.youtube.com/watch?v=_3GwyKBIRtE&feature=related]YouTube - Turbo YFZ450 Dyno Results[/ame]

[ame=http://www.youtube.com/watch?v=tKSqtp-7DuU&feature=related]YouTube - MotoDani Yamaha YFZ 450 Turbo[/ame]

[ame=http://www.youtube.com/watch?v=tdtFcCnS-Z8&feature=related]YouTube - yfz 450 turbo brazil[/ame]

Posted
Tuning is very important when using a forced induction system. Make sure you start with a rich carb mixture. You will need to increase your jet sizes quite a bit to get the extra fuel you need to go with all the air that the turbo will be cramming into the motor. I would guess that the turbo kit should come with new jets, possibly a bigger carb too. If you don't get enough fuel, that motor will be toast in no time. As far as how it will run with the turbo system properly installed, I think that it will be something like a raped ape with rabies on steroids.

ill keep that in mind for sure. thanks!

i had my frame powdercoated and averything else all i need to do it put it back together wich i am doing now. the hard part is getting it tuned out right like u said. but im excited about it. this should be a one of a kind bike when i get finished.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By Maxg_57
      Is anyone still active on this club
    • By toe420
      Anyone here from BC? Where do you ride? 
    • By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
    • By Callaway
      I am trying to diagnose a no spark issue with my 02 Big Bear 400 and I am really hoping it is not a CDI.  I have done the test on the stator and I believe that is faulty.  I ordered a new aftermarket one from a the jungle website and it tested bad right out of the box so I am waiting for a different one to arrive from an ATV parts supplier.  I started looking out of curiosity at CDI units and it seems if it is for a big bear you are SOL.  Kodiaks, no problem.  Big Bear. No such luck.  
×
×
  • Create New...