5 posts in this topic
Let me know what you guys think. Just registered as a member here and thought I'd bring something to the table. I probably have around 50 or so ATV how-to videos on my channel. Please let me know what you think!
Yamaha Banshee Bottom End Assembly Vid Part 1 of 5 - YouTube
Banshee Carb Cleaning and Rebuild Mikuni - YouTube
Yamaha Blaster Bottom End Engine Assembly - YouTube
What's the best way to fix this?...
Best idea so far is to clean it all up, sand the bottom side real good and find a piece of durable plastic I can shape and form to the bottom, and sand it as well. Then hold it all together somehow and epoxy the formed plastic to the bottom side. After curing, drill holes on both sides of the crack and thread wire through like shoelaces for support, pull tight and tie off.
Seems like I read about some kind of goop you could use in this situation but I forget what it was called. I believe it would take the place of the epoxy.
Right now I need advice on what kind of plastic to use and how to source it, as well as what kind of epoxy.
I'm all ears.
My four trax has a snow blade with a winch mounted on the blade. The winch looks like a wiper motor. I would like to install a winch on the Quad, so it will handle the blade and also pull the quad up into the bed of my truck. I see mounts on line for my Quad, but I cant see how they would possibly fit. If anybody has a pic of a winch on this vintage quad, I would appreciate it. Thanks Todd