Quantcast
Jump to content

Recommended Posts

Posted

BTW...Arrows and Knives penetrate BP vests...

Herewith is a beautiful recue Bow.  A friend sat it in a closet for years. te tip wasnbent over from sitting on the tip.  He gave it to me and I took it to an archery store.  The guy said it was useless as if you string it it woul break when pulled back. 

I rigged up a frame to hold it and put tension  to twist it back in shape. It sat for a  couple years. The string on it I used to make sure the tips were in line .   Now it is back to its original shape.  I made  a new string for it and it draws fine.recurve.thumb.jpg.b2bf0c98564e6ad683c806e14728571a.jpg 

  • Like 1
Posted

I have a recurve bow with a fishing rig on it. Shot it one time, wasn’t paying attention and the string caught my middle finger. Snapped the first joint from my hand, had to have surgery and now have a permanent recurve in my finger.  Question was there a reason you strung the bow like you have it in the pic, instead of over the curves, just wondering. My grandson borrowed mine and haven’t seen it since.

The middle grandson borrowed my .308 and it’s not made it home yet. Will get it back, it’s a savage model 110, shoots great, killed a deer at 275 yards. they’ve all three picked out what weapons they want when I die. Makes it feel like they are rushing things.

Posted

The string across the bow i  used to  make sure the tips of the bow were in line with the middle of the bow as I applied clamps to bend the limbs back to normal.  Th is recurve rated at 50 lb.

I have a cheap 35 lb fiberglass that I have a fishing spool attached to. I have two  Compounds I use a trigger release. My bedroom is a duck managerie.  I was into painting decoys.

image.thumb.jpeg.0aa656372c97317c4b3521f34572a842.jpeg

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By HeWasRidinDirty
      The one I need to replace has a 2 wire plug coming out of it. Searching eBay I see tons of them with only 1 wire . WTH???

×
×
  • Create New...