Quantcast
Jump to content

Recommended Posts

Posted

Okay I my ride runs but when I load it in the truck or go up a hill it will flood out and not want to start again. Before I go and spend a lot on a new carb I was wondering if anyone had any ideas on this. Also like a big dummy when I bought it used and it had sit for a while I did not clean the fuel tank out and now im going to pull it off and clean it and was wondering also if anyone had any suggestions on what would be something good to clean it with. I have read to use acetone and then was told to use alcohol. Any help would be highly appreciated.

Posted

I'm not sure if I can help. when the frontend of a motorcycle or quad is lifted in the air while loading on a truck if it's at a steep angle gas will run out and onto the ground. If your not seeing this with your quad I would say something could be stopped up and the fuel is flooding out your carb because it has no where to go or it could be a float sticking. There are people on here that knows alot more than me on QC I'm sure someone will be able to help you. As far as cleaning the carb I would use carb cleaner it's worked for years. Good luck and let us know what u find out.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By toe420
      Anyone here from BC? Where do you ride? 
    • By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
×
×
  • Create New...