Quantcast
Jump to content

Recommended Posts

Posted

Was just wondering if anyone has had a problem with excessive noise from the trans on this model. I picked one up for my son and did a little work on it, and have it running great but there is quite a bit of noise coming from the dual range side of the trans. Does this require oil? I look in the owners manual and could not find anything, any help would be greatly appreciated.

Posted (edited)

your engine oil works the transmission, best to use yamalube 4 or valvoline atv 4 stroke oil. given the age of the bike, it's probably do for some clutch work. maybe a new clutch and pressure plate...take the clutch cover off and jack it up securely on jack stands and run it, you should tell where the noise is coming from. in the service manual, you can only turn the clutch clockwise, try turning it counter-clockwise and if it moves, it's shot. also look at the front sprocket and the gears for wear.

Edited by oxidized_black
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By toe420
      Anyone here from BC? Where do you ride? 
    • By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
    • By ButchM
      Hisun 700 EFI. Replaced TMAP sensor had broken off . Fuel pump pressure 41psi. The only way I can keep it running (and runs fine) is to close off fuel return line. 
    • By Callaway
      I am trying to diagnose a no spark issue with my 02 Big Bear 400 and I am really hoping it is not a CDI.  I have done the test on the stator and I believe that is faulty.  I ordered a new aftermarket one from a the jungle website and it tested bad right out of the box so I am waiting for a different one to arrive from an ATV parts supplier.  I started looking out of curiosity at CDI units and it seems if it is for a big bear you are SOL.  Kodiaks, no problem.  Big Bear. No such luck.  
    • By dkgg5755
      This thing came with a cheap aftermarket carb on it the problem I'm having is it won't start with choke installed into carburetor it will start and get run without it installed then bogs out after about 2 min run time I've checked timing , compression, checked valves for proper clearance , also did a smoke test for air leaks found none. 
×
×
  • Create New...