Quantcast
Jump to content

2004 Honda 400ex - Nosie ~ Please Help

katie-kate

By katie-kate
in Honda ATV Forum

 Share

Recommended Posts

katie-kate Newbie

katie-kate

Posted
Posted

i just adjusted the valves on my 400ex and the right exhaust valve keeps coming very loose and there is a slight slapping noise other than the valve but it is not a constant slap does any one have any suggestions on what this might be.. thank you for your time!

marioweldinginc Veteran

marioweldinginc

Posted
Posted

Sometimes upon start up whether cold or warm but mostly cold the decompressor makes a slapping noise. it can last for 10 seconds to a few minutes. I would check your torque spec on that valve and make sure its not stripped. Im not sure if its ok to do but maybe put red loctite on the jam nut. never seen em keep getting loose

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • canamKID
      2013 outlander max xt 650 loud whirring noise
      By canamKID
      Anybody familiar with this noise from my quad? Just started.  It temporarily goes away when I attempt to shift into another gear but shifting has gotten harder too.
       
      Thanks
      20260711_150338.mp4
    • oztrax
      MY OTHER RIDE !!!!
      By oztrax
      was thinking most of us on this forum would have another ride, so to get the ball rolling...........
      MY MAX 4 6X6 2009, now this will actually go anywhere including across the water. In the 3rd photo I had gone up the river about 30 meters then climbed up the bank, 6X6 owners call it "swimming" 
      MAX 4 6X6 2008 
    • Maxg_57
      Anyone there?
      By Maxg_57
      Is anyone still active on this club
    • marlon smith
      1990 Kawasaki Bayou 300 Intake and Exhaust Pop
      By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • LCP92
      Leaking valve seals?
      By LCP92
      Guys, I've got a 1999 Honda Foreman 450S.  It runs great, but smokes out the exhaust after startup until it warms up.  I'm thinking the valve seals are leaking.  I was wondering if there is a way to replace them without removing the head or if there's an oil additive that will recondition the rubber seals.  Any advice?

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...