Quantcast
Jump to content

Recommended Posts

Posted

Hello!

I'm new on this forum and I'm from Slovenia. I have a problem with my Adly 300xs. And the problem is that the ATV is pulling(i hope you understand that, in the dictionary is nor a right word). And this look like this that while i driving the ATV pull. It is not important or the ATV is cold or hot. And the ATV sometimes ignite very hard sometimes normal. We try change c.d.i. unit and i try with spare key but it is not any different, ATV still pulling. I don't now what is wrong. Is maybe guilty this that i wash one day and the water came somewhere is not supposed to come?

Please help me.

Have a nice day

Posted

Hm. With pulling i mean in our language "trokirati" but this is not in dictionary. I mean that the ATV not run smooth but every 3seconds is like that the ATV die. I hope you undarstand.

And even when is motor in the idling is once in 2000rpm, once 3000, once 1500.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By ButchM
      Hisun 700 EFI. Replaced TMAP sensor had broken off . Fuel pump pressure 41psi. The only way I can keep it running (and runs fine) is to close off fuel return line. 
    • By dkgg5755
      This thing came with a cheap aftermarket carb on it the problem I'm having is it won't start with choke installed into carburetor it will start and get run without it installed then bogs out after about 2 min run time I've checked timing , compression, checked valves for proper clearance , also did a smoke test for air leaks found none. 
    • By BillR94
      I picked up this ATV that had no spark. The previous owner said he was driving it and it died and would not start. He discovered it had no spark. He replaced the CDI and the coil with no luck. He got tired of it and I bought it. I replaced the stater and now it has strong spark. Now, it starts for a second or two then dies. It will not stay running. I have checked the timing and it is spot on. The valves are adjusted correctly. I see no warn issues with the cam. I put the original CDI and coil back on it. Same problem exists. Compression is at 65 psi (has decompression mechanism),
      I took off the muffler in case the issue was clogged pipes. No change. I replaced the spark plug. No change. The carb was an aftermarket so I put a Niche carb on with no change. I bypassed the fuel pump and that did nothing to solve the problem. 
      I don't know if this is a carb issue or an ignition issue. I am looking around locally for an OEM carb to try out but not sure that will fix the problem. 
      Can anyone help me solve this problem. I am running out of ideas. 
      Thank you for your time
      Bill
       
    • By McClaw
      Hi Guys, I'm new to this forum.
      I have been riding quads for the last 20 years, however my quads are extremely old and outdated, all three are about 20 years old LOL.
      I have been looking at upgrading, but need your input.
      I've narrowed it down to the Polaris Sportsman XP 1000 S or the Honda FourTrax Foreman 4x4 EPS
      What do you guys think?
       
       
×
×
  • Create New...