Quantcast
Jump to content

Suzuki King Quad 700 - Doesnt Disengage 4x4

benjaminching

By benjaminching
in Suzuki ATV Forum

 Share

Recommended Posts

benjaminching Rookie

benjaminching

Posted
Posted

hey, after a short ride i realized my 06 king quad 700 was in 4x4, the button was in the 2wd position, as was the LCD display. i took a quick look at the actuator and it was hot to the touch, any ideas where i should go from here? thanks

hangingon Grand Master

hangingon

Posted
Posted

I had this to happen on my 02 prairie 650 in stayed in 4wd and the gages showed 2wd. I pulled the actuator and then added power to it and my actuator was turning but there was a small block on the actuator that was worn so I thought that was the problem the block of metal swivels on a pin it was what contacted the collier to slide it back & forth to engage or disengage 2wd & 4wd. Mine turned out to be the front diff. Now I wll say this my actuator did not get hot. I would pull it out and turn the switch on on your quad and flip it 2wd & 4wd and see if your actuator is working if you have to unplug the wires to remove it just remember to plug them back in once you remove the actuator. Or if you have a 12 volt battery charger you can use it to test the actuator.

hangingon Grand Master

hangingon

Posted
Posted

I hope you get it fixed soon! Good to hear it's the actuator and not the diff. I got lucky with my prairie I guess you could say my frame broke where the front A-arm mounts so I was looking for a frame and ended up getting an 03 prairie not running for 300.00 so that took care of my diff trouble, frame & left me with extra parts that I sold for 200.00 a used diff sells for more than what I paid for the donor quad and 200 was cheap for the extra parts I sold and the buyer had them sold for 400

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Suzukiquad
      New member / quad lover
      By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • Thekevinjb
      Hitch for a Polaris quad
      By Thekevinjb
      Can anyone provide information on connecting a hitch to a Polaris. Anyone know where they sell small trailers for my quad. 
      thanks
    • Atomusthenes
      88 Honda four trax 300 4x4
      By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • Tim Keiper
      2 problems with 2000 Timberwolf 4x4
      By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • Rich1028
      I Crashed My Quad
      By Rich1028
      I Crashed My Quad
      Well the Way I Ride, some of you knew it was Inevitable.
      Below are Three Videos.
      First one is Slow Motion of How it Happens.
      Second one is Normal Speed, and what happens after the Accident.
      Third one Follows more of what happens after .

      I Was Riding By Myself. I was going through a Mud HOLE Either there was a log or a rock, or A Dip but just as I was almost through it, Machine, Rolled over on my right side, as soon as I contacted the ground, I Heard A SNAP! I got up, flipped the Quad back over. I had the wind knocked out of me.

      5 broken Ribs
      1 Punctured Lung
      1 Broken Collar Bone
      2023 Quad Riding Season is Over for ME!
       
       
       

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...