Quantcast
Jump to content

Recommended Posts

Posted

Need help deciding if I should get this raptor. It's a 2003 raptor 660. Looks in good shape. Yoshi exhaust. Guy wanted 2200. Got him down to $1500. Is this deal too good to pass up? I was looking for a z400. I already own a z400. Just looking for another quad for brother in law. I read that the 660 is tippy and front end comes up too easily. Any info?

Posted

Get it at that pricwe its great i have a 01 and love it lots of power and runs pretty fast mine does 81 because ive built it up[a little bit..You can put a 15tooth sproket on it for 10$will keep the front end from coming up..Im 15 and 6'2 220 and its great, get weheel spacers for 60$ that spreads them out so its not so top heavy..There all around great! Check the vavels and loosen them up they tighing up quite often and run like sh** but other wise there great..Alot of people say the tranny is bad but i beat mine and have never had a problem..Also the starter clutch goes out but there easy to fix for 150 buy your self! Good luck Go get it!!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By Gtc4d
      I recently purchased a raptor 80 for my grandson for  christmas. I am trying to make sure it is running properly. i have rebuilt the carb and adjusted the carb idle then the mixture to middle of where it runs rough and it runs great for about a min or 2. then it stalls out. I can usually choke it and it will start so i feel it is lacking fuel. the fuel shutoff valve has been changed and i checked it for good fuel flow.  any ideas of what to check next. I am planning to vfy fuel float height tomorrow. I visually checked it by turning carb upside down when i had it apart and it looked level. any ideas are appreciated. 
       
      Thanks.
      Todd
    • By jordan_ATV
      I got a 2005 350 Raptor Special Edition and I'm dealing with a no start issue; the weirdest thing is when I'm cranking it fires and slows down showing signs of pre firing, smoke shoots out the carburetor every time it sparks. every electrical part (CDI, Rectifier, Stator, Coil) has been swapped out from previous owner, the top end of the engines all new and I cleaned the carb out, anyone got any ideas or similar problems, also is it possible to have a bad spark timing
    • By 95kingQuad
      As the title says I am on the search for a used OEM 1995 King Quad Carb. I believe it says Mikuni on the side. If you could even help me find info on which carb it is exactly that would be helpful too, or motorcycles/other quads that use the same carb. Thanks!
×
×
  • Create New...