Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

brstone34

Banshee basket case

Recommended Posts

I just got a banshee that had been a project and the person lost interest. Long story short, the bottem is complete and together, the jugs doesn't have the new sleeves in them yet. New sleeves are to fit stock 65mm pistons. Does the new sleeves need any kind of work to accept the new pistons and rings such as honing or bevelilng the top lip? Does the jugs go into the sleeves in a specific way? Does the jugs need a small bore to accept the new sleeves?

Share this post


Link to post
Share on other sites


I got your message about the manual. Because the links are out there in space, everyone down loading them is breaking the traffic limits... try at midnight when the limits reset. CK1999_400ex is the one to message with your questions. He just started working on his banshee too. Hope this helps...

Share this post


Link to post
Share on other sites

Thanks oxidized_black. I talked to a local person today and found the answers I was needing. As far as the service manuals it keeps saying error and login failed so I don't know what is up with that. Thanks for the help.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Tagged Content

  • Similar Topics

    • By MarkinAR
      Picked this beauty up for zero dollars this weekend. It has been passed around several of my son's friends and the last kid was just tired of tinkering with it.  Mostly complete 96 300FW. The pic is my boy robbing the swing arm and rear diff for his 300 for a big memorial weekend ride. Wiring is garbage at the battery, kick start doesnt work, no coil, smoked like cheech and chong when it ran last. I figure a couple hundred and a few hours and this will be ready to ride. Journey will be documented on Instagram at @martincyclellc if ya wanna follow along. 

    • By NoahJakavi
      Hello i have a linhai 300 of the 2004+- era. I had a cluch problem so we changed it. After changing it has a hard time to start going. When you pop it into gear and press the gas it barely drives but when it starts going about 20km/h it start driving well the acceleration is normal and everything do you have any idea of what could be the problem
    • By jwline
      Friday evening went riding, rode for a good hour or so everything was fine. I went to take a short ride to the restroom (less than 100 yds away) and all of the sudden everything flickered and then just died out. Accompanying the problem I noticed the killswitch completely locked up. Once daylight hit took the killswitch apart to find it had shorted out and melted the plastic inside. Has anyone else had anything similar to this and if so what did you do to fix the situation? I have a new killswitch on the way to replace the obvious problem but was wondering could there be a bigger issue at hand. We tested with a voltage meter to make sure everything was still getting power from the battery and as far as we could tell it was.
      Any advice/info would be GREATLY appreciated.
      Thanks.
    • By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








    • By Frank Angerano
      So i have a friend at work who was recently diagnosed with a small but very manageable heart problem.  He is in good shape but doc says he shouldn't be shoveling snow or anything crazy for a while until they figure this out. So he asked me to see what i can find him to plow since he has a good size piece of property.  So i spent the last two weeks scouring the local states to find him a good atv with a plow! 
       
      Found  him a big bear 400 4x4 with a plow for a steal!   Going to go through it good and put my touch on it and deliver it next week. 
       
      As much fun as we have with this quad thing its just as much fun helping others out!
       






  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...