Quantcast
Jump to content


2005 Honda 400ex - Rear Alignment

xe004ADNOH

By xe004ADNOH
in Honda ATV Forum

 Share

Recommended Posts

xe004ADNOH Newbie

xe004ADNOH

Posted
Posted

i have a 2005 honda 400ex that started pulling to the left. tie rods, air pressure are all good. but i noticed my rear axel is tweak a little. i measured the distance between the front and rear wheels at the center of the axles on both side. the distance betwen the right side is shorter from what i mesured on the left side of the quad. witch is what i think is causing it to pull to the left. does anyone know how i go about aligning the rear axle?

thanks

Link to comment
Share on other sites
marioweldinginc Veteran

marioweldinginc

Posted
Posted

On a 400ex it might mean your rear carrier bearings are shot. Lift the rear off the ground and wiggle / spin the axle. Any sort of play or noise means you might need new bearings. Also check to make sure the axle lock nut is tight. Its in between the brake rotor and axle carrier

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • jashadams
      2009 Ttr 125le rear shock trouble
      By jashadams
      So I installed a new shock on my 125 yesterday sadly it wasn't adjusted right I took it off to adjust it tried to install it again today and it no longer fits I loosened the nuts on the spring again and it still won't fit idk what I'm doing wrong when I try to install it but I'm lost any tips or videos would be great thanks.
    • BuckBilly
      The Official Good morning thread!
      By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • mga
      good stuff or snake oil?
      By mga
      I see quite a few ads for that  Tribotex additive. It's kind of expensive, has anyone used it it their ATV or any other vehicle?
    • utvboard
      2009 Honda Big Red
      By utvboard
      2009 HONDA BIG RED
      Honda enters the MUV (multi-use vehicle) market with a side-by-side machine that leapfrogs the competition to set new standards in utility and recreation. With numerous automotive-based technologies, Big Red features a powerful 675cc OHV liquid-cooled PGM-fuel-injected single-cylinder engine and an automatic transmission with three selectable drive modes plus Reverse, front and rear independent double-wishbone suspension, a roomy cab featuring rubber-mounted bucket seats with adjustable backs, and a specially designed, highly durable, tilting cargo bed. A broad selection of Honda Genuine Accessories will also be offered.
      Big Red
      KEY FEATURES
      - Powerful OHV, liquid-cooled, PGM-fuel-injected 675cc, mid-engine design.
      - Automatic transmission with Reverse.
      2009 Honda Big Red in Camo
      - Three selectable drive modes.
      - Front and rear independent double-wishbone suspension for an impressively smooth comfortable ride.
      - Roomy cab and rubber mounted bucket seats with adjustable backs designed to comfortably fit a wide range of body types and reduce fatigue on long drives.
      Specially designed, high durability, tilting cargo bed
      - Specially designed, high durability, tilting cargo bed.
      - Wide variety of Honda Genuine Accessories.
      - Summer 2008 release. More information to come soon!
      Board Message - UTV Forum - Online UTV Community and UTV Forum
    • BruceG
      2005 Bruin 350cc Oil pumping into airbox
      By BruceG
      Hi guys. I have a problem where the quad will start and run well for about 5 minutes and then it dies. On inspection the airbox has oil in it (quite a lot). The oil is pumping through the cylinder head breather hose. This problem first happened suddenly. I have since done the top end including, piston, gaskets, rings and valves. I have also done the carb (not that I thought that this was the problem). The compression seems normal. The only thing that I can think of, is that I did not grind the valves well enough. Anyone experienced this? If so, how did you fix it? Any other thoughts?

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...