Quantcast
Jump to content

Recommended Posts

Posted

Do you have the push-button-Honda-like-shifter mechanism?

I know there has been some electrical issues with some of these machines. Mostly related to the semi-automatic shifter-system, and to the little electrical motor that engages and disengages the 4x4.

This little motor often burns up internally, and therefor need replacement.

You can loosen the engage/disengage-motor by loosening the 4 screws in the pic below, and open it up, having a look-see.

There will come some diff-fluid when you take the motor out, so be sure to add some when putting it all together again.

If you have a test light there are a few simple tests to determine if it's your actuator or your switch that is giving you the shift problem, first make sure you have a your test light connected to a good ground, turn your ignition to the on position,(do not start it) now turn your 4x4 switch to the on position or the engage position. Now with the test light touch the connectors at the actuator to see if there is any power at the actuator.

actuator.JPG

actuator.JPG.c43ff3ff44b7e44c3e19fa46cc86354e.JPG

  • 5 years later...
Posted

Hi I know this isn't about the four wheel drive, but I would like to put the foot shifter on my 08 odes 400 ATV. And I went to put it on last night and the rod that is coming out of the engine just sits there and spins to one side then stops and can go all the way back to the other. How do I hook this up? Please help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By Maxg_57
      Is anyone still active on this club
    • By Shorty51
      Good morning, I am new to the forum. I'm 75 years old and love getting ATVs back to usable condition. I particularly like the 2006-2009 Arctic Cat 250 Utility. I currently own 6. The 2006 I am working on only has reverse and low gear. The "drive shaft" in the transmission is completely stripped where the high gear would mesh. Has anyone on here replaced the shaft. I'm told I have to split the case. I was hoping that someone on here could let me know how hard it will be. I already have it stripped down to where the shaft coming in from the clutch side is the only thing left. I was hoping I could just remove the driven clutch and drive it out from there. Directions say different. Any help would be greatly appreciated.
    • By toe420
      Anyone here from BC? Where do you ride? 
    • By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
×
×
  • Create New...