Quantcast
Jump to content

Recommended Posts

Posted (edited)

I have been starting my Kodiak all winter to make sure the battery was charging. I took it out on a ride last week 7 parked it. Went out today to go for a ride & when I tried to start it it made a buzzing noise when I pushed the starter button. It was in neutral & I put it in park & still no luck. I then put it back in neutral & it started. I turned it off & tried to start it again & it made the buzzing noise. It won't start now. The buzzing noise is coming from the left side off the atv on the back end. That is when I was sitting on it. Any help would be appreciated.

I have taken my seat off & believe my problem is the starter solenoid. It has a 30 amp fuse & a spare fuse with it. The fuses look good. I also checked the starter fuse & it seems to be good. Any help please. Would like to ride tomorrow. Thanks

Edited by Muzzlegirl
Posted

with a sxrewdriver, try crossing the two posts with it, it will spark, but if it turns over, it is the solenoid. you could try to clean the connections there with sandpaper and add some dielectric grease to keep the connection clean, or vaseline (petroleum based)

  • 3 weeks later...
Posted
I have been starting my Kodiak all winter to make sure the battery was charging. I took it out on a ride last week 7 parked it. Went out today to go for a ride & when I tried to start it it made a buzzing noise when I pushed the starter button. It was in neutral & I put it in park & still no luck. I then put it back in neutral & it started. I turned it off & tried to start it again & it made the buzzing noise. It won't start now. The buzzing noise is coming from the left side off the atv on the back end. That is when I was sitting on it. Any help would be appreciated.

I have taken my seat off & believe my problem is the starter solenoid. It has a 30 amp fuse & a spare fuse with it. The fuses look good. I also checked the starter fuse & it seems to be good. Any help please. Would like to ride tomorrow. Thanks

I have the same issue.....have you found your problem??

  • 2 weeks later...
Posted

Check your battery voltage - keep your volt meter on the battery when you hit the starter button. Drop of 2+ volts without the engine turning over and you've got a dead cell. Try jiggling your connections at the battery, corrosion there at a tight connection will keep it from starting and cause the solenoid to buzz.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Fonne
      Hi 
      Is looking for a quad to pull a flail mower as my first priority, but also a bit of fun. 
      So its going to be pulling a flail mower on high grass / weed on a bumpy field at pretty low speed. 
      My budget is not high, so is mostly looking at a old Yamaha Kodiak 400cc / Suzuki Eiger 400cc or similar. 
      What machine would you recommend  ?  - Really want a solid machine since I am no mechanic but can perform a early service myself. 

      (English is not my native, hope it makes sense)

    • By canamKID
      Anybody familiar with this noise from my quad? Just started.  It temporarily goes away when I attempt to shift into another gear but shifting has gotten harder too.
       
      Thanks
      20260711_150338.mp4
    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
×
×
  • Create New...