-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
-
Similar Topics
-
By Strike37G
Quick question about bolt on valve cover (circled). Is this used for any type adjustment or connected to anything or is it a service vacuum port? Wanting to install a vacuum fuel pump and look like a good spot to connect vacuum. Thanks to all.
-
By maddj63
What qualifies as a Post on quadcrazy?
I need to get up to 10 posts to be able to download the maintenance manuals.
-
By Frank Angerano
This is a good question asked by @Johnny Chancellor. I put it in a new topic so it does not get lost. We all know we need a cdi box but I bet a lot of the members here don’t know how it works. This is a good explanation of a cdi box including what it does, how it works and what “cdi” stands for.
Ive posted two links here. Feel free to add to the list!
https://www.elprocus.com/capacitor-discharge-ignition-cdi-system-working/
https://en.wikipedia.org/wiki/Capacitor_discharge_ignition
-
By trx125flip
yay forum stuff again... really needing a 87 trx125 service manual.. if anyone has one without a dead link that would be super!
-
By Charlesawest936
Hello QuadCrazy guys and gals. Iv got a 2007 Kodiak 450 that's iv been trying to get running again after having to split the case so I could change a few of the transmission gears since the previous owner over did it and broke teeth off of 3 different gears. Anyways iv got the motor put back together and put back on the frame and I keep having problems with the one way bearing on the starter Idle gear locking up and causing the starter to spin with the motor. Now I am able to pull the rotor/flywheel off and then I have to pry the one way bearing off of the idle gear after this happens. But I am able to reset the bearing and put the starter gear on and I then put the keyway on it then I slide the rotor with the one way bearing bolted to it on as far as I can and I lock down the rotor by holding it and tightening it down. At this point all is great I'm able to rotate the crank by hand counter clockwise and the starter and idle gear are free like it's supposed to be and if I reach back behind the rotor and spin the idle gear counter clockwise it engages and spins the crank like it's supposed to. But after hitting it with the starter a couple times it locks up again. I'm pulling my hair out with this damn thing. Before I split the case to fix the transmission it didn't have any starter related issues. Also the starter Idle gear hub where the one way bearing rides doesn't look bad or anything same as the bearing it looks fine as well. Any ideas before I have to order a new bearing and idle gear? Oh also if I put it together and only use the pull rope of course it doesn't lock up, only does it after a few times of the starter being used.
-
-
Similar Tagged Content
-
- 0 replies
- 1,312 views
-
- 0 replies
- 1,247 views
-
- 3 replies
- 3,152 views
-
- 0 replies
- 2,157 views
-
- 0 replies
- 4,695 views
-
-
Gallery Images
-
0
-
0
-
3By mjl01,
-
0
-
1
-
3
-
0
-
3By curtis,
-
1By banshee1,
-
10
-
7
-
5By RockCandyChris,
-
4By Jrod,
-
2
-
6By Chazman,
-
9By tnfoxracer,
-
4By iball511,
-
3
-
9By oxidized_black,
-
4By globob24,
-
-
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.