Quantcast
Jump to content

Recommended Posts

Posted

Hey all, I just want to start by saying I am brand spanking new to the wide world of ATV's. I had one as a kid, then didnt step foot on one again till yesterday. And that brings me to this site. I just got a used Timberwolf 2wd of Craigslist. I am a very excited new quad owner. Its not perfect, it smokes and if you dont stay on the gas it turnes off most of the time. Also there is no battery atm so I am using the pull start. So heres my deal. I got it right around sun down. Rode it around for about 10 minutes, bought it. Rode it around again for another maybe 20 minutes as the sun was fully set. (It needs a battery before the lights will work I am told). So I park it. Next morning. I go outside, pull the choke. And she fires right up. Rode her around for about 30 - 45 minutes. I got home from that ride and was going to go park it. I down shifted into neutral so as to put it in reverse, and before I could get it in gear it died. And I hanvt been able to get it started again. Choke in choke out nothing. I have a couple ideas, let me know what you all think.

1. Clean the very very filthy air filter, not sure though it would make it die and not start.

2. Clean the carb. I am very confused though because it worked and worked then all the sudden nothing.

3. Get a battery. I am hoping that in getting a battery it will work with the electronic start.

4.Change the gas. The gas that came with it is discolored and looks old. Still, it got me 10 miles at least no problem.

I kinda think maybe the fact that it cant hold an idle withoout being on the gas may have something to do with why it now wont start.

Other than that, all I can think is to take it to a shop. But I am a broke as* so I really dont want to have to do that. Any questions or suggestions would be great.

Posted

With no battery hooked up (even a bad one) you may have fried something electrically - check for spark: pull the sparkplug, re-insert it to the wire, leave the threaded portion of the plug against the motor (cyl head) and have someone pull the pullstart - watch for a fat blue spark that goes ZZKT. No spark try a new plug (NGK D7EA). Still no spark you might be chasing electrical parts (Stator/Pickup assembly, CDI/ignition box).

Posted

If your getting spark (as gears stated). I'd look at the carb. If I'm not mistake it has 2 jets. One is an idle jet, the other is the main jet. More than likely they are clogged as discolered/bad gas may have trash etc in it. I placed an inline fuel filter in my quad to catch debris and things.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
×
×
  • Create New...