Quantcast
Jump to content

06 King Quad timing

dblR

By dblR
in New Members Area!

 Share

Recommended Posts

dblR Newbie

dblR

Posted
Posted

Thanks for the bits and peices of info. Fired this 06 with 5-6k and Never serviced! Timing had jumped 6 teeth on the intake, due to no 0 psi oil pressure to keep the cam chain tensioner tight enough to prevent cam from spinning. Added oil stripped the front end and checked the timing notches repeatedly. Never lined up parallel 6 teeth off to realignment with exhaust valve cam. Reset to parallel bolted intake cam shaft with exhaust cam, installed spark plug wire and vawalla! It friggin runs, smokes bad but I would too after 5k miles and never check a service manual or oil or maintenance schedule. My problem now but She is mine and running! Hats off to the forum I got a skeeter beater here in Maine!

dblR

Have a great day in the woods!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Popular Now

  • Similar Forum Topics

    • Yamahahahaha
      Chain guard solution 1987 Quadrunner LT230E
      By Yamahahahaha
      I'm in the middle of repairing damage from the chain coming off of this from the previous owner. (I learned this is somewhat common on these for various reasons.)
      What are you guys using to either help keep the chain correct and on the sprocket or guarding your engine in the case that it comes off / breaks?
      Is there an upgraded guard that can bolt around the sprocket in replacement of the currently broken OEM alluminum?

    • marlon smith
      1990 Kawasaki Bayou 300 Intake and Exhaust Pop
      By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • P_syko
      Shaft drive vs chain drive?
      By P_syko
      Which is more reliable? Shaft or chain drive? 
    • Damien911
      Setting the timing on a 2005 Yamaha 250 Bruin
      By Damien911
      Setting the timing on a 2005 Yamaha 250 Bruin
    • johnboer
      LT250EF intake manifold
      By johnboer
      I've been tryna find a replacement intake manifold for my 85 LT250EF because it's all hardened up but i can't seem to find one. Are there any other manifolds that would fit this model. Or how should i soften this manifold. I saw that wintergreen oil would help to soften it up but i wouldn't know how long it would last. Any other tips on how to get a tight seal around the engine intake would be appreciated.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...