Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

I got a (2006 I think) Guangdong Jialing Chinese 110cc that I got from a friend that only needed a battery. Ran great but died a few times but would start right back up. Then it quit due to no spark. So I replaced the CDI, Coil, and Spark Plug but now it has spark but its intermittent. Could it be the stator magneto or voltage regulator that would cause the spark to intermit like that? Any help would be greatly appreciated.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Brother Buddy Gardner
      Hello everyone! I recently purchased this quad for a mere 300.00 and it is pretty clean for the year. I bought it from a guy who bought it in a storage unit. He didn’t know anything about it. I got it home and noticed it did not have an ignition coil for the spark plug. I bought the ignition coil, a new battery, new CDI box, new starter relay, new safety neutral relay, new carb and so on... I got it to turn over, but when I pull the plug and check for spark I have nothing.. it has a non factory starter button that works when I push it and turns the engine over no matter if the key or stop switch is on or off..not sure what that’s all about, but it does turn over..just no spark at the plug. Any help would be greatly appreciated! Thanks!
    • By Admin
      We would like to wish everyone a Fantastic Memorial Day Weekend!


      SUPPORT OUR TROOPS!




    • By amharrison24
      i have a 91 moto 4 100. has electric start only. for as long as i could remember we have always pushed start it. after riding for while you shut it off. you are able to hit the start button and it will start right up. anyone know where i should start with fixing this issue? im fixing it up for my niece. thank you in advance.
    • By Steven Urban
      First time using this forum.  Owned a Kawasaki dirt bike once, had no issues.  But I picked up this 4 wheeler at an auction.  They stated it ran, but only needed a battery.  Well I do not believe that was all true.

      Some pictures are attached.  Not sure why, but the whole air filter stuff was removed.  They had some small thing inserted as a make shift air filter.

      I purchased a battery to try this all out.  Waiting to return it and get the proper size, as it was too big for the battery box.  But here is my issue I had while the battery was connected.

      1 - The lights on the steering column did not come on.  Not sure if they work or not.

      2 - The starter solenoid seems to be bad.  I have a new one on order. 

      3 - In the pick, there is another rusted part.  Not sure what that part is or what it is used for.

      4 - What is the 12v rectifier?  square bodied part.

      So when I hooked the battery up.  Pushing the start button did nothing.  Pulling the cord to try and pull start, it turned, but would never fire.  I have put in a new spark plug as well, it looked worn out.  With electric start, I crossed over the posts on the start solenoid, it turned over, but would never fire and start.

      I have read a few other threads and it stated something about needed the neutral light on.  SOmething about a kill switch.

      Any help would be appreciated.



  • Similar Tagged Content

    • By pickytar
      I have a Chinese Hybird 250 or that's what I was told it was. I found 17 numbers on the frame. Will these numbers tell me exactly what it is that I have? (I know that its a 2006 from a plate on the front)
    • By Barrysquad
      Somehow I lost all of my spark on my 350Big Bear, its a 1990. It ran well for maybe 3 days! Thought it was the carb. Cleaned it 4 times. It was losing power at midrange. Got worse and worse. Finally nothing!
      Are these good coils? I was thinking I could swap?
      2002 Honda-200cc: primary 0.4(ohm-200) secondary 9.0(ohm20k)
      1990 Yamaha-350cc: primary 0.8 secondary 11.0
    • By txlora84
      I have a 110cc atv not sure of a brand its a Chinese model. I put on a new harness with cdi solenoid and all those. I have put a new starter on, and carburetor. I bypassed the start button cause it was just making the solenoid click. with the new button switch the atv will crank but not start. I tried to jump the solenoid and it did nothing. I am stumped. also I noticed gas leaking from the carburetor and when I took the filter off there was gas in it. I cleaned the carburetor and nothing was stuck or clogged. can someone help me out.
    • By JenWal85
      Hope someone can help with this one.
      We took our 1984 Honda TRX 200 to the shop and they had it for about 2 weeks before they finally called and said that they had cleaned the carb and changed the battery and that it had started up.
      We went and got it and when we got home it would not start so we called them, they said bring it back in, so we did. They called us the next day and said they changed the spark plug, and that it was running. We went and got it again and it ran when we drove it off the truck.
      We parked it for about an hour because we were going to get ready to go on a ride. Well, it wouldnt start again.
      So we called them and they said the last thing they could do was order a new CDI box and put that on. I decided to just buy it myself, so I didnt have to pay them labor again. We put the new one on today and its still not starting.
      Does anyone have any ideas on what we could check to see what in the world is going on with this thing?
      Please and Thank you
    • By cbbubby78
      can someone tell me what could be the problem if the electric start doesn't turn the motor over but sparkplug fires like crazy but the pull rope turns the motor but no fire on spark plug. thanks for any advice in advance . cbbubby78
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...