Quantcast
Jump to content

Recommended Posts

Posted
OK guys, Ive got a 1996 suzuki king quad 300. Just where and how do you get to the CDI unit on these? Is there a way to check these if you dont have the suzuki tool or meter?

Well this is a long term problem that keeps getting slowly worse. The atv runs fine for awhile and then especially when it starts getting cold it begins not wanting to start. It also wants to not want to start when i go on long rides.

I took it to a suzuki dealer in helena last year and they replaced the piston and honed the head and it ran fine for awhile but then it started right back into not wanting to start, especially in cold weather. I got out the book and started through the not wanting to start section. the gas is fine, the breather tube is fine but there appears to be a weak spark at the plug. so I am just following the book. It said to check the CDI and Ignition coil but the manual really doesnt show a good picture of exactly where they are.

  • 5 years later...
Posted
On 9/22/2014 at 10:17 AM, Mike8623 said:

Well this is a long term problem that keeps getting slowly worse. The atv runs fine for awhile and then especially when it starts getting cold it begins not wanting to start. It also wants to not want to start when i go on long rides.

I took it to a suzuki dealer in helena last year and they replaced the piston and honed the head and it ran fine for awhile but then it started right back into not wanting to start, especially in cold weather. I got out the book and started through the not wanting to start section. the gas is fine, the breather tube is fine but there appears to be a weak spark at the plug. so I am just following the book. It said to check the CDI and Ignition coil but the manual really doesnt show a good picture of exactly where they are.

Hey Mike, I have a similar problem. What was the final cause and solution to the weak spark/no run situation?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By docdoug72
      Has anyone had a suzuki 230 quad lock the engine up?  Its a well maintained bike, it locked up when my son was riding it. Pulled the plug, it has connected with the piston. I'm thinking the con rod let go.  I don't have a service manual.  Does the engine need to come out to check further?
    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Thekevinjb
      Can anyone provide information on connecting a hitch to a Polaris. Anyone know where they sell small trailers for my quad. 
      thanks
    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
×
×
  • Create New...